以FAT16文件系统的SD卡驱动程序

佳能打印机IP2200在Linux下的驱动。-Canon IP2200 printer driver in Linux under.

M3355的源代码，开发DVD的可以参考一下。-M3355

主要讲了单片机实现数学计算器的功能，十分好。-Major topics of the MCU math calculator features, very well.

一个基于嵌入式linux的串口驱动程序和测试程序的源码，很实用的。-a Linux-based embedded serial port driver and testing procedures source code, the very practical.

这是一个基于金蝶K/3的磅秤插件源代码。安装本差价需要金蝶K/310.0以上的版本。本插件是客户端程序。在车辆过磅时自动产生金蝶K/3的出库单。-This is a based on Kingdee K/3 plug-in source code of the scales. Install this post needs more than Kingdee K/310.0 version. This plug-in is the client program. When weighed in the vehicle automatically generated Kingdee K/3 of出库单.

资源描述本程序主要包括以下功能： 1.设置锁相环和总线频率； 2.IO口使用； 3.ECT7口16位计数器。 LED计数，根据灯亮可以读取系统循环了多少次

基于ARM7 LPC2124 油压控制系统原程序-Based on ARM7 LPC2124 hydraulic control system of the original procedure

AD芯片TLC2543的转换例程。-AD chip TLC2543 transformation example regulation.

配合hzk16可以在屏幕上打印点阵汉字，可以用于测试hzk16，或用于其他相关。-With hzk16 can print dot matrix characters on the screen can be used to test hzk16, or for other related.

1， SPI_877A,是针对PROBE877A所写。 SPI_877,是针对PROBE877所写。 SPI_77，是针对PROBE77所写。 初次使用使用PICMATE2004或者其简化版精灵版，如果为以上提到的3款型号，并有TPDEM1， 请根据PROBE型号在相应文件夹下打开项目，编译，并运行，具体连线请看各文件夹说明。 2， 其它文件夹项目均针对PROBE877A所建立，如果要使用PROBE877，请修改头文件，并选择PROBE877支持的芯片。 3， 严格禁止将PROBE877与877A混用，否则将造成仿真芯片工作异常。-1, SPI_877A, is written by PROBE877A. SPI_877, is written by PROBE877. SPI_77, is written by PROBE77. First-time use or its PICMATE2004 Wizard version of Starter Edition, if for the above-mentioned models 3 and TPDEM1, please PROBE models in the corresponding folder to open the project, compile, and run, the specific connection see the folder Note. 2, other projects are folders created for PROBE877A, if you want to use PROBE877, please amend the header file, and select PROBE877 support chips. 3, is strictly prohibited PROBE877 and 877A will be a mix, or else the work will result in simulation chips abnormal.