This is a study on the AT91RM9200 schematics, has been proved through practice,...

ARM9 的触摸屏的程序，实现液晶显示 触摸屏的功能-ARM9 Touch Screen procedures realize liquid crystal display touch screen function

关于ARM7的AT91FR40162的启动小程序-One small program run at starting about the AT91FR40162, ARM7.

本代码是瑞萨和飞思卡尔智能车比赛的源码，很好的对智能车进行控制，完成各项控制指令的要求，达到预期的要求效果，来很好的控制车辆的转弯，直行，控速等等一系列的操作！

Name Function --- --- --- Check_SST_39VF160 Check manufacturer and device ID CFI_Query CFI Query Entry/Exit command sequence Erase_Entire_Chip Erase the contents of the entire chip Erase_One_Sector Erase a sector of 2048 word Erase_One_Block Erase a block of 32K word Program_One_Word Alter data in one word Program_One_Sector Alter data in 2048 word sector Program_One_Block Alter data in 32K word block Check_Toggle_Ready End of internal program or erase detection using Toggle bit Check_Data_Polling End of internal program or erase detection using Data# polling-Name Function ------------------ Check_SST_39VF160 Check manufacturer and device ID CFI_Query CFI Query Entry/Exit command sequence Erase_Entire_Chip Erase the contents of the entire chip Erase_One_Sector Erase a sector of 2048 word Erase_One_Block Erase a block of 32K word Program_One_Word Alter data in one word Program_One_Sector Alter data in 2048 word sector Program_One_Block Alt

S3C2410&嵌入式linux系统教程-S3C2410 & Embedded linux system Tutorial

MCF5272的板极初始化程序，完成CPU的寄存器、中断、RAM的初始化，并有个SHE-MCF5272 the plate initialization procedures, the completion of the CPU registers, interruption, Initialization of RAM, and a She

应用背景CANopenNode is an opensource CANopen Stack. CANopen is the internationally standardized (EN 50325-4) CAN-based higher-layer protocol for embedded control system. For more information on CANopen see http://www.can-cia.org/ Stack is written in ANSI C in object-oriented way. Code is documented. License is LGPL. It includes Example for CANopen Input/Output device and simple CANopen master. Variables (communication, device, custom) are ordered in CANopen object dictionary and are accessible from both: C code and from CAN network. Code includes:  - CANopen Stack for multiple microcontrollers with documenation.  - Working examples of simple Input Output CANopen device for all microcontrolers.  - Working CANopen master device with HTML interface to CANopen: CAN log, Emergency log, SDO master, NMT master, Custom CAN message. (It

2410各功能口驱动！与大家分享 2410各功能口驱动！与大家分享-I drive the 2410 feature! 2410 to share with you the various features I drive! To share with you

基于LPC2148的UCOSII，已经移植好了GUI，FS和SD卡驱动-Based on the LPC2148

This mainly about the Fat32/16 s specification and some instructions about build the USB Disk ect.