MCS

所谓固件，就是存储在程序内存中的程序,用以完成驱动程序无法完成的USB 芯片及外围芯片的初始化及控制工作[23]。USB固件程序设计是USB接口部分的主要工作，它的主要目的是：当USB设备连接到主机上时，主机可以发现新设备，然后建立连接并完成数据传输任务，也就是能够让Windows正常检测和识别USB设备。因此在USB固件程序中，最重要的工作就是USB描述符的定义和USB传输中断的处理。-called firmware is stored in the memory of the procedure, Drivers used to complete the impossible chip and external USB chip initialization and control work [23]. USB firmware design is USB major part of the work, its main objectives are : When USB devices connected to the host, the host can be found in new equipment, then establish a connection and data transmission to complete tasks, is to let the normal Windows USB detection and identification equipment. Therefore USB firmware procedures, the most important work is described USB define and USB transmission interruption of treatment.

生成驱动程序框架的程序-generation driver framework of the procedures

tft-lcd驱动原理1,为想要了解液晶显示驱动提供很好的指导-tft-lcd driver Principle 1, in order to want to understand the liquid crystal display driver to provide good guidance

Virtual Floppy Driver

Virtual Disk Driver

nmE100bex网卡驱动程序-nmE100bex LAN Driver

PCI设备驱动例子,包含了基本的读写中断等功能-PCI device driver example, contains the basic functions to read and write interrupt

SIM100 的驱动程序 ，多多指教，可以采用我试过 -SIM100 driver exhibitions can be used I tried

关于一个驱动的测试代码-test code about driver

atmel9263-ek开发板nandflash测试程序,自己写的-atmel9263-ek development board the NANDFLASH test procedures, wrote it myself