MPLAB IDE环境下软仿真基础教程。

关于MSP430与SD卡的FAT16文件系统-On the MSP430 with the SD card FAT16 file system

MCU与PC键盘通信程序，接口为PS/2；I2C通用驱动程序-MCU with a PC keyboard communication procedures, interface for PS/2; I2C common driver

LV4137显示驱动,自己做的,比较简单,但很实用,MCU用的是Myson MTV512,Keil下编译-LV4137 display driver, to do their own relatively simple, but very practical, MCU using Myson MTV512, Keil compiler under

MCS-51单片机有5个中断源，其中两个是由-INT0、-INT1引脚输入的外部中断源；另外三个是内部中断源即由T0、T1的溢出引起中断和串行口发送完一个字节或接收到一个字节数据引起中断。触发外部中断有两种方式，即下降沿引起中断或低电平引起中断。当编程TCON中的ITi（i=0、1）为1时，则引起触发的方式为边沿触发方式，反之(ITi=0)为低电平触发方式。每个中断源的中断请求能否得到响应要受两级“开关”的控制，即一个总“开关”-MCS-51 single-chip has five interrupt sources, two of which are by-INT0,-INT1 pin input external interrupt source the other three internal interrupt sources from the T0, T1 overflow caused by the disruption and serial port sending or receiving end of a byte to a byte of data caused by interruption. Triggered external interrupt has two modes, namely, falling edge or low-level disruption caused disruption caused. When programming TCON in ITi (i = 0,1) for the 1:00 has been the subject of a way to trigger the way to the edge of the trigger, on the contrary (ITi = 0) for low-level trigger mode. Each interrupt source interrupt request can be subject to levels in response to

５１控制ＬＣＤ显示原程序，可直接使用，很不错的风格-LCD display 51 to control the original procedures, could be directly used, very good style

单片机的简单的串口通信测试程序单片机的简单的串口通信测试程序

该书是单片机入门的一本好书，值得大家一看共同学习-The book is a single-chip entry of a good book, it is worth one U.S. study of common look

DSP下载工具的原理图和PCB图,适合用于自己设计DSP开发板-Download tools, DSP and PCB schematic diagram, suitable for use in their own design DSP development board

c8051f020中使用液晶lcd的程序，经调试通过。液晶采用fyd。-C8051F020 used in liquid crystal lcd procedures adopted by the debugger. LCD using fyd.

全国大学生电子设计大赛历年题目_Frily-National Undergraduate Electronic Design Contest calendar year subject _Frily