PDIUSBD12固件编程指南

这是一个用C语言在VC6.0环境下编写的用于USB驱动的代码，经过实验验证，绝对正确。-This is a C language using VC6.0 environment in preparation for the USB driver code, after experimental verification, absolutely correct.

usb 设计参考资料 可以借鉴 usb1.1-usb reference design can draw on USB1.1

本程序适用于购买的朋友,本代码为此书的第12章-This procedure applies to the purchase of

USB接口驱动程序-The USB inerface driver program

数据采集程序，采用同步模式，包括主机程序，固件源程序，驱动程序。出自《USB2.0原理与工程开发》我现在需要USB键盘方面的源程序，如果你有请提供crzman@163.com-data collection procedures, using the synchronization mode, including mainframe procedures, firmware source, the driver. From "USB2.0 Principle and the development of the project," I now need a USB keyboard aspects of the source, If you please provide crzman@163.com

这个程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件名,并可显示首文件内容,不过,该程序很不严谨,也没有任何错误处理,对U盘兼容性较差,只是用于简单试验,作为参考.这个程序可以支持WINDOWS按FAT16格式化的U盘,因为程序精简,所以只兼容超过50%以上的U盘品牌,如果换成CH375A芯片则兼容性可提高到85%,当然,如果使用WCH公司的子程序库或者正式版本的C源程序兼容性更好-this procedure with 180 OK C code can read FAT16 file system drives the root directory, we can see the root directory under the file name, would show the first document, but the very stringent procedures, and there is no error handling, the U-poor compatibility, but for the simple the pilot, as a reference. this procedure can be supported by Windows FAT16 formatted U disk, because the procedure is streamlined and therefore only compatible with more than 50% of the U-brand, if chips were replaced CH375A compatibility can be increased to 85%, if the company"s use of WCH Subroutine Library or an official version of the C source better compatibility

usb接口编程c++源代码。不是很大，但用处很多，可移植。-usb interface programming c source code. Not great, but a lot of useful, portable.

usb host

一个不错的usb加密卡的设计，用户端。用的cypress公司的芯片。-a good usb encryption card design, client. Cypress with the company"s chip.

USB固件程序,文件系统,USB2.0其它-USB firmware, file system, USB2.0 other