C语言开发最佳之开发平台，keil公司的中文版。绝无竟有之宝

这个程序是44B0的发光管轮流闪烁，希望能给你带来帮助-This process of 44B0 are alternately blinking LED, I hope you will help

多周期处理器--verilog写的,欢迎大家来下载，-multicycle microprocessor written with verilog HDL

三星ARM9 芯片s3c2440开发linux时的引导程序源代码，相当于pc机的bios-Samsung ARM9 chip s3c2440 development of the Linux boot source code, which is equivalent to the pc-bios

DNW0.50A软件的源代码，在ARM2410上面通过串口和USB口烧写操作系统镜像时必须用到的软件。-DNW0.50A software source code, in the ARM2410 above the mouth through the serial port and USB programmer to be used for mirroring the operating system software.

这时最简单的一个程序，运行后，三个LED在闪，因为程序没有初始化串口，所以运行后超级终端没有反应-At that time the most simple of a process running, the three LED in flash, because the procedure did not initialize serial port, so after running HyperTerminal no response

资源描述            k60dn512的示例程序。有着比较完备的驱动示例程序，K60的外设驱动几乎都有。

本代码是串口扩展芯片GM814X在 Arm9―usos上使用的实例， 包括：芯片说明Datasheet，芯片在51单片机上的驱动，以及特有的（我编写的）芯片在s3c2410上的驱动。 -Expansion of the code is the serial chip GM814X in Arm9-usos use examples, including: chip note Datasheet, on-chip single-chip microcomputer in 51 drivers, as well as the unique (I am prepared) S3C2410 chip in the drive.

TI DM648 gpio配置源代码,可以下接下到板子上,非常不错-TI DM648 gpio configuration source code, you can take to the board on the next, very good

ARM开发详解-ARM to develop detailed

arms3c2410汇编启动源码start.s，-Start arms3c2410 compilation of source start.s,