NorFlash the programmer and the related notes can achieve the program s online s...

Linux下用C来操作gsm modem, 初始化gsm modem.-Linux using C to operate the gsm modem, initialize gsm modem.

gef plugin for eclipse

使用单片机控制4路TRF3765的源代码，单片机是STC15F2K60S。控制锁相环产生不同频率的信号

cpress鼠标固件源码--Source code for cpress mouse.

秒表最大计时时间为3分钟59秒。系统设置2个功能键，控制秒表启停。秒表启动时从00秒开始计数，2位的七段数码管显示变化的秒数（以十进制形式），计数范围为00-59秒。停止键按下，系统维持显示计时的最后值。开发板的2个数码管作为秒表的秒显示，秒表的分钟显示功能由2个LED灯（LD3和LD4）按二进制形式表示，即LD4为最低位，LD3为最高位，当2个全亮时表示3分钟。开发板中的两个按键Key2为开始键，Key3为停止键。

详细描叙arm-linux的配置过程，整个过程都是自己经验总结，还配有大量图片，可供需要的人使用-Arm-linux describes in detail the configuration process, the whole process for his own experience, also has a large number of pictures, for those who need to use

关于uc/os嵌入式操作系统中的例程--uCOS-II operating system code based on LPC2104. Sample codes about uc/os embedded operating system.

血压计部分源码,采用Energy Micro efm32系列单片机-Sphygmomanometer part of the source, using Energy Micro efm32 series of microcontrollers

此代码在SDT2.51下调试通过，可以在我的板子ARM DEVELOP BOARD V1.0上面跑！经测试也适应于恒丰公司S344BOX等采公板设计的开发板。在其上电以后LED会闪烁一下，接着串口0会输出一些系统信息 可以通过串口终端与系统交互，可以测试320X240 STN LCD,包括图形显示函数，ascii字符显示函数。-this code under the SDT2.51 debugging through, I can blame the ARM DEVELOP BOARD V1.0 above Run! After tests also adapted to Prudential and other mining companies S344BOX public board design development board. In his last-- after about LED blinks, Serial 0 then the output will be some system information through serial terminal and system interaction, can test the 320 X240 STN LCD, including graphic display function, ascii character display function.

利用msp430的通用I/O端口模拟I2c协议的源代码，利用此代码可以不需要I2c模块即可进行I2C通信-use of the Controller General I/O Ports I2c agreement simulation source code, the use of this code can not I2c module can hold I2C communications