kl25z GCC项目

Developing Embedded Software in C，英文原版的，嵌入式开发的c。看了一定有收获的。-Developing Embedded Software in C,English Edition,emdeded develop c,you may get a lot

一个嵌入式的C++库，目前正在处于开发中，该版本是最新版-an embedded C library is currently under development, which is the latest version Version

总的来说，在uClinux上的开发和标准Linux还是很类似的。通常可以按照下面的步骤去设计和调试： 建立基于以太网的开发环境； 如果所设计的程序和硬件的关联不大，那么一定要在标准Linux上先编译和调试通过。灵活地使用gcc和gdb将大大节省时间； 将x86上的GCC编译好的应用程序用交叉编译工具来编译；如果编译时发现错误，那么很可能存在以下问题： 交叉编译器或库文件的路径不正确；最彻底的解决办法是重新装一次编译器； 遇到库不支持的函数；此时需要自己把函数的实现做成另外一个库供应用程序使用。如果是uClinux本身不支持的调用，那么就需要改写代码了。-Overall, the uClinux on the development and standard Linux is still very similar. Usually can use the following steps to design and debug : Ethernet-based development environment; If the design of the procedure and not linked to the hardware, then it must be the first standard Linux compiler and debugging through. Flexibility in the use of gdb and gcc will greatly save time; X86 will be on the GCC-compiled application with cross-compiler tool to compile; If you compile time error is found, it was very likely that the following issues : cross-compilers or libraries are not the correct path; The most radical solution is a re-installed time compiler; encountered does not support functions; At this time the need to

keil环境，自己的测试代码，各种功能完善-keil 3.5 lpc2368 program i2c

protel转pads的工具，原理图和PCB都可以直接进行转换-Protel to pads of the tool, schematic diagram and PCB can be directly converted

本段代码实现了uc/osII系统在51单片机上的移植，uc/osII系统是一种实时多任务的操作系统，可以在多种平台下实现移植，而51单片机是其最简单的移植平台，对其硬件的要求RAM>256,在实验代码中，我们实现三个任务实时进行切换。

用SL811USB接口芯片读写U盘FAT16固化程序(C51源代码)-SL811USB interface chip with read and write FAT16 U disk firmware (C51 source code)

8019中文数据手册，给阅读英文数据手册嫌麻烦的朋友-8019 manual to read English manual data as troublesome friend

本代码基于mini2440的裸机开发代码，语言版本为C,在ARM9架构中此代码可为您发送短信提供借鉴意义，指令为AT,

用AT89C52演奏音乐，并带有跑马灯。可用Proteus 仿真运行。-AT89C52 concert with music, and with Bomadeng. Proteus running simulation can be used.