源代码是一个音乐播放器的TMSF2812语言，已测试

在ARM7开发板下实现CAN总线驱动的开发，已调试成功，修改工程路径即可用，CAN控制芯片为MCP2510-the drivers of canbus in the arm7

Controller Area Network Programming Interface Environment Ver0.8。 CanPie版本0.8. CAN总线通讯编程接口源代码。-Controller Area Network Programming Interface Environment Ver0.8. CanPie version 0.8. CAN bus communication interface programming source code.

我自己写的在ARM 44B0上能跑通的LCD display 程序-I wrote it myself in the ARM-44B0 able to run on the LCD display procedures

可以实现ARM芯片9200和串口芯片TL16C554A之间的通信，而且性能非常的稳定，抗干扰能力强。-ARM chip 9200 can be achieved and the serial communication between chips TL16C554A, and the performance is very stable, anti-interference ability.

使用硬件I2C对E2PROM进行操作，利用中断方式操作。-use of hardware I2C E2PROM to operate, using interrupt operation.

对ARM Cortex-m3系列芯片指令，异常和中断等进行了详细的描述，具有权威性，中文版的。-On the ARM Cortex-m3 series chip instructions, exceptions and interrupts etc. are described in detail, with authority, the Chinese version.

基于ARM的嵌入式系统，涉及到软件设计的启动代码、实时操作系统、链接定位和调试技术，很实用，希望对大家有所帮助。-ARM-based embedded systems, software design involves the start-up code, real-time operating system, links, positioning and technique, it is useful, we hope to be helpful.

S3C2440的中断处理部分，已调试通过，起码串口和网卡都已OK-S3C2440 part of the treatment interruption have been debug through, at least the serial and network card are OK

44B0+UCOS+UCGUI，！多任务移植！！不错的参考！难得!-44B0 UCOS UCGUI,! Multi-task transplant! ! A good reference! Rare!

This document can be considered as a supplement to the already existing Application note AN10302 “Using the Philips LPC2000 Flash Utility”, which is provided in the same zip file. The Application note covers the following topics:-This document can be considered as a supplement to the already existing Application note AN10302 "Using the Philips LPC2000 Flash Utility", which is provided in the same zip file. The Application note covers the following topics :