CENTER file system

ucgui在gba上的移植-ucgui impressions in the transplant

这个是我的一个车机项目中正在使用的LIN代码.MCU是STM32F103使用的是UCOS-II系统.这段代码包括LIN的从模式的初始化、接收、回应等。利用的是串口的LIN模式中断。带有很多中文注释。希望对你有用。(This is the use of a car engine project my code in LIN.MCU is the use of the STM32F103 is UCOS-II system. This code includes LIN from model initialization, receiving, response. Use of the interrupt serial port LIN mode. With a lot of Chinese notes. I hope useful to you.)

ucos for arm 1176 porting

用于ucos移植的一个小程序，应该会对大家有用-For ucos transplant a small program, it should be would be useful for everyone

UCOS的源码，它的硬件基础是80186，只要你的电脑只要是INTEL的CPU，就可以在你的电脑上面正常运行，你也可以把它移植到你的MCU，所以这个源码是研究UCOS的最佳选择。-UCOS the source, and its hardware is based on 80,186, as long as your computer as long as it is INTEL" s CPU, on your computer in the normal operation of the above, you can transfer it to your MCU, so the source is to examine the UCOS the best choice.

基于lpc17xx  32位单片机的 UCOS_II 嵌入式实时操作系统的程序，keil mdk开发环境的，程序结构清晰，适合初学者学习，方便移植

将本站的UCOSFORAVR128V276版本升级到了280版，修正原来的中断定义错误，并仿真调试已通过。-UCOSFORAVR128V276 the site will upgrade to version version of the 280, that the interruption of the original definition errors, and debugging simulation has passed.

UCOS 在ARM9_S3c2410上的移植，本程序在我的硬件上调试没有任何问题，是我自己移植的UCOS 和网上其他的移植代码有些不同，本程序已经在工程中稳定运行1 年。-UCOS ARM9_S3c2410 on in transplantation, this procedure in my hardware debugger without any problems, is my own uCOS transplantation and other transplant-line code is somewhat different, the procedures have been in the works in stable operation for 1 year.

用LPC2138做的07年电子设计大赛源码，基于ucos的1024点FFT。-Done in 2007 with the LPC2138 Electronic Design Contest source, based on ucos 1024-point FFT.

说明：  uc/os在c167上的移植代码，tasking编译器(This file includes the uc/os source code for the port to c167, and tasking compiler)