ucos官方发布的版本v2.83，所有的源代码，不经修改的

LPC2368驱动淘宝上27元钱的TFT的代码，包含了uCOOS+uCGUI，希望各位能够用得到：），已通过测试。 (27 dollars of the TFT the LPC2368 drive Taobao code contains uCOOS+uCGUI hope you will be able to get :), has been tested.)

ucos3 在LPC1788上的移植过程及源代码文件，希望可以帮助大家(ucos3 on the LPC1788 transplant process and the source code files, hope it can help you)

Can总线的控制协议，主要是用来实现以Can总线协议的方式进行的数据传输-Can Bus control protocol is primarily used for Can bus protocol in order to realize the way the data transmission

这是一个用vc6.0模拟的ucgui的源码-This is a simulated ucgui with vc6.0 source

这是ucos在Freescale9s12XS128上移植成功并测试成功的代码(This is ucos in Freescale9s12XS128 successfully transplanted and successfully tested on the code)

一个AT91SAM7X256 CAN计数器中断实验，硬件环境为at91sam7x-ek开发板，开发环境为iar。-AT91SAM7X256 CAN interrupt a counter experiment, the hardware environment at91sam7x-ek development board, development environment for iar.

ucos在z80上的移植-CENTER Z80 in the transplant

ARM7下的UC0S原代码-ARM7 under the original code UC0S

lpc21xx（飞利浦的ARM）目标板特殊的代码，包括异常处理程序和目标板初始化程序 每个工程应当具有这个文件的拷贝，用户根据程序的需要修改本文件。(lpc21xx (Philips ARM) target board specific code, including exception handling procedures and target board initialization procedure for each project should have a copy of this document, the user according to the procedures of the need to modify the present document.)

这是我针对LPC2000系列的一个串口发送接收的程序，对学习NXP系列的朋友是一个很好的例程，特别是串口部分，其编程风格也不错-This is my LPC2000 series against a serial sent to receive the procedure, NXP learning series is a very good friend of routines, especially the serial part of good programming style