USB 飞力浦固件开发源码:基本业务处理功能，完整开发文档，已编译通过...

很实用的通用usb驱动程序的应用程序开发指南-Very practical generic usb driver Application Development Guide

2407上ucosii移植实现，值得参考-2407上ucosii移植实现，值得参考！！！！！！！！！！！！

详细介绍了VC++6.0环境下利用windowsAPI函数来实现与符合HID设备的USB接口通信，并给出部分源代码。-Described in detail VC++ 6.0 environment using windowsAPI function to achieve compliance with HID devices with USB interface, and gives part of the source code.

vc下 usb程序USB端口的分析, VC-MFC 硬件-系统 VC,MFC基础类,非技术类,界面,网络编程,进程,线程,DLL,ATL,ActiveX,COM,数据库,硬件,系统,HTML,XML,图形处理,算法,-vc procedures under the USB port usb analysis, VC-MFC hardware- System VC, MFC foundation class, non-technical type, interface, network programming, process, thread, DLL, ATL, ActiveX, COM, database, hardware, systems, HTML, XML, graphics processing, algorithms,

RS232-USB转化器将老式RS2332串口转换成USB接口来与PC机进行数据传输，USB控制器采用CY7C63001A-RS232-USB converter old RS2332 will be converted into a USB serial interface with the PC for data transfer, USB controller CY7C63001A

vc环境下编译的一个与USB端口进行通讯的驱动程序，初学者应该看一看。-vc environment compile a USB port to communicate with the driver, beginners should take a look at.

波形发生器isotransferloader-waveform generator isotransferloader

本文档可以通过修改USB接口的用户密钥设置，可以作为生产使用

USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信 USB的枚举过程分为4个状态. 1.接入态 v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms) 2.默认态 v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR) v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS) 3.地址态 v主机从新的地址获取设备描述符(GET_DESCRIPTOR) v主机获取所有设备的配置描述符(GET_DESCRIPTOR) 4.配置态 v主机设置描述符(设备,配置) (SET_CONFIGURATION) v主机读取配置状态(可选) (GET_CONFIGURATION) v主机读取接口状态(可选) (GET_INTERFACE) -USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A

usb design reference