这是一个电子钟的设计源程序,可以实现摇控功能,LCD2402

C51 TIMER 0的使用 Timer_0_mode_0_timer_gate_soft-C51 TIMER 0 use Timer_0_mode_0_timer_gate_soft

这是一个AVR开发板的所有必需的源码，包括原理图，PCb图以及调试用的C例程-This is an AVR development board of all the necessary source code, including schematics, PCb map and debug using the C routines

单片机的串口调试程序，可实现简单的串口通信-Single-chip serial debugging procedures can realize a simple serial communication

单片机51，C语言，病房呼叫系统，课程设计作业，希望对有些人有帮做-Single-chip 51, C language, ward call system, curriculum design operation, in the hope that some people have done to help

这个是用MedWin配合proteus仿真的单片机程序，使用的AT89S52单片机控制14个数码管动态扫描，实现时钟和日期显示。并有按键控制，仿真也通过，内部附有HEX文件-This is MedWin microcontroller simulation with Proteus, the use of the AT89S52 Singlechip control 14 digital control of dynamic scanning, the realization of the clock and date display. And a button control, through simulation, the internal file with HEX

A/D转换，转换结果用液晶显示出来，液晶是OCMJX12864。显示的结果是数字量。使用的是ADC0809。（有原理图）-A/D conversion, conversion results liquid crystal display, LCD is OCMJX12864. The result is digital displays. Are using the ADC0809. (With schematic diagram)

经典的DSP的C程序和汇编程序, 非常好!-Classic DSP-C procedures and compilation of procedures, very good!

用485实现单片机之间的串行通信。 主机部分发送从机地址，等待从机响应，从机准备好就发数据,发完就接收从机的响应，接受成功就跳出循环，否则重发。-MCU with 485 Serial Communication between. Host of this address from the plane, waiting for the response from the plane, from the plane ready to discuss the data, finished on the reception of the response from the plane. set aside for recycling success, otherwise re-issued.

一个用于驱动TFT屏的驱动程序,使用IC:1828,program (无EEPROM 无IR,完整说明)IIC只写一个-driving a TFT screen for the driver, the use of IC : 1828. program (no EEPROM non-IR, a complete explanation) just write a IIC

适合用于mc9s12dg128的EEPROM开发。-Mc9s12dg128 suitable for the development of the EEPROM.