钛及# 39可与# 39个示例程序实现480i视频捕获和播放…

dsp arm的很多讲义和说明。 关于怎样使用ccs bios以及matlab到dsp的代码转化，已经弄成可以打印的格式了-dsp arm of a lot of notes and annotations. On how to use matlab to ccs bios and dsp code transformation, has made it to print the format of the

5509 MMC in Native Mode

一个FIR的滤波的程序，能够实现滤波的原理！更好的理解FIR-A FIR filter process that can realize the principle of filtering! A better understanding of FIR

硬件要求：基于合纵达的SEED-VPM642的示例。软件要求：CCS2.2以上版本。对于想用DSP/BIOS开发的同道中人来说是很好的学习实例。-Hardware Requirements: Based on the combined vertical up the SEED-VPM642 example. Software Requirements: CCS2.2 above. For want to use DSP/BIOS development for the fellow human is a very good learning examples.

TMS320F2812通用IO口驱动程序-TMS320F2812 generic IO port driver

正弦波（50HZ）作为全桥逆变器的调制波，三角波作为载波（20K），交叠产生SPWM波驱动全桥的四个开关管，对称桥臂加死区防止直通，单极倍频调制方式，有助于减少谐波。

DSP开发环境CSS的中文说明书，对大家学习有帮助-DSP development environment of Chinese CSS specification, the U.S. has to help learning

TI公司C6000系列DSP（DM642）模拟视频采集与回显源代码

有刷电机控制硬件，测试有刷电机在不同占空比的PWM波下的转动性能， 电机驱动芯片为LMD18245-Have brush motor control hardware, the test has brush motor at different duty cycle of the PWM wave rotation performance, motor driver chip for LMD18245

5个源程序都是在VisualDSP环境下开发出来的，目标处理器是4片AD公司的TS1O1 DSP。其中：1）IDE_FAT32用来在硬盘上创建FAT32文件系统；2）i2c_test编写IIC总线；3）codec_a_in_pal_cf_frame是加载到FLASH的程序，板子在脱离PC自动上电时会把PAL制的图像直接存到CF卡里，CF卡的文件系统是FAT16；4）codec_a_in_pal_buf_boottest是可加载的DSP图像直通程序；5）ADSP-TS101prog_driver是flash的驱动程序。-five VisualDSP source in the environment are developed under the target processor is four AD TS1O1 the DSP. Of which : a) IDE_FAT32 used in the drive to create FAT32 file system; 2) to prepare i2c_test IIC bus; 3) codec_a_in_pal_cf_frame FLASH is loading procedures, the board automatically from the PC on when power will be PAL system images directly to CF card, the CF card is the FAT16 file system; 4) can be loaded codec_a_in_pal_buf_boottest DSP image through procedures; 5) ADSP-TS101prog_driver flash is the driver.