CY7C63，64家庭USB芯片的开发工具。cyasm.exe和包括63000…

USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信 USB的枚举过程分为4个状态. 1.接入态 v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms) 2.默认态 v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR) v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS) 3.地址态 v主机从新的地址获取设备描述符(GET_DESCRIPTOR) v主机获取所有设备的配置描述符(GET_DESCRIPTOR) 4.配置态 v主机设置描述符(设备,配置) (SET_CONFIGURATION) v主机读取配置状态(可选) (GET_CONFIGURATION) v主机读取接口状态(可选) (GET_INTERFACE) -USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A

数据采集卡，采用同步传输模式。包括主机程序，固件源程序，驱动程序。出自《USB2.0原理与工程开发》我现在需要USB键盘方面的源程序，如果你有请提供crzman@163.com-data acquisition cards, using asynchronous transfer mode. Including mainframe procedures, firmware source, the driver. From "USB2.0 Principle and the development of the project," I now need a USB keyboard aspects of the source, If you please provide crzman@163.com

针对USB 设备或主机开发过程中的调试过程，如果能对协议的过程和细节内容了解地非常清楚，则对于调试过程非常有帮助，就意味着可以预测主机（或设备）下一步应该做什么，此文档目的在于描述控制传输和批量传输的协议细节。-USB device or host

usb device test Speed

关于usbview的驱动程序设计。-on usbview driver design.

USBhost source

详细介绍了用VC++ 6.0 的环境下利用 windows API 函数来实现与符合HID设备类的USB 接口通信， 并给出通信程序的部分代码-Described in detail with VC++ 6.0 environment using windows API function to achieve with the equipment in line with the HID class USB interface, and gives part of communication program code

cypress带mcu的usb芯片用于windows的万能驱动程序源代码-Source code of universal Windows driver for USB chip with Cypress MCU.

很不错的USB仿真软件-very good USB Simulation Software

PC端的USB主机源代码-USB PC-mainframe source code