UCOS在S3C2410上针对的键盘应用

1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示； 2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别 产生1s的定时时间，将时间分别显示到数码管上； 3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display (2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively, Produce the timing of the 1s, the time display to the digital control External PS/2 keyboard, the key value of displayed through the serial port to a PC.)

ucosII在ARM7上的移植源代码，根据自己的要求修改一下即可-ARM7 on ucosII transplantation in the source code, in accordance with the requirements of their own to make some corrections

dm9000a，DM9161AE的驱动程序，写的很详细。可以用在ucos上(dm9000a, DM9161AE driver, written in great detail. Can be used in ucos on)

包括ＥＰＡ协议栈，ＴＣＰ／ＩＰ协议栈和ＵＣＯＳ操作系统

说是ucos2的完整代码,我看了后的确不错-It is the full source code of ucos2. I have read it, and it is really good.

说明：  UCOS III操作系统培训教程，非常好的文件，入门学习！(UCOS III operating system training tutorial, very good documentation, the beginning of learning!)

嵌入式arm7的tcp/ip协议的实现，开发环境为ads1.2，可以实现tcp和udp的通信-Embedded arm7 the tcp/ip protocol implementation, development environment for ads1.2, can be achieved tcp and udp communication

从软盘向内存 加载 程序的 asm 源码 开发工具 masm 5.1 结合debug 可以加载很多东西-from floppy disk to memory loading procedures asm-source development tools can integrate debug 5.1 can load a lot of things

寄予KEIL for ARM 2.5的H―jita例程.-placed KEIL for ARM 2.5 H-jita routines.

ucOs-ii完整源代码，极其方便用户调用-ucOs-ii complete source code, an extremely user-friendly call