触摸屏的校正程序。可以用于触摸屏的校正。在三星的平台上测试通过...

无线解码程序，是用于多种无线报警主机的解码-wireless decoding procedure is used in a variety of wireless alarm host decoder

采用AYG-59C GSM MODEM模块，和at89s52的串行口通信。通过at指令控制GSM模块，同时用单片机处理GSM发给单片机串口的反馈信息，实现远程无线控制。-Used AYG-59C GSM MODEM modules, and AT89S52 serial port communications. GSM through at command control module, at the same time deal with single-chip GSM distributed feedback single-chip serial port, wireless remote control.

优龙2410板子的BIOS代码，程序清晰明朗，容易移植到类似的开发板上，十分值得推荐。-2410 Liuzhou excellent board of BIOS code, the program clearly uncertain, easily transplanted to a similar development on the board, very much worth recommending.

8051-adc0804

这是凌阳16位单片机接LCD240*128液晶显示模块的源代码，而且带有语音播放的功能。-This is the Sunplus 16-bit microcontroller then LCD240* 128 LCD module s source code, but with the voice playback functions.

1602 液晶显示 电子表程序时 分 秒 使用的是新华龙单片机 100脚 的 -1602 liquid crystal display digital watches every minute procedure using a new single-chip 100-pin of Hualong

此为18B20的温度检测以及键盘控制和液晶显示程序.好用.-18B20 This is the temperature detection and control of the keyboard and LCD display program. Easy to use.

这是一套用C语言完成的128*64液晶屏驱动，没有设备，未验证可用性-This is a set of C language with the completion of the 128* 64 LCD screen-driven, not equipment, not to verify the availability of

通过GPRS的PPP拔号程序,本程序在x86下通过测试-through GPRS PPP dialup procedures, the procedures adopted in x86 tests

针对philips的51单片机LPC931的具体应用的例子。实现对uart, spi, i2c等硬件资源的操作。还有针对小内存单片机操作系统的实现。-against Philips Microcontroller 51 LPC931 the specific application examples. Implementation of UART, 20, i2c hardware resources operation. There are small memory microcontroller operating system is achieved.