LPC17开发板的USB

实现了PC机和外接硬件实验台的通信，查找设备，根据设备的参数和性能进行连接...对于硬件学习者有很好帮助作用。-Realize the PC and external hardware test-bed of communications, search equipment, according to equipment and performance parameters for the hardware to connect ... to help learners have a very good role.

网上收集的利用nios软核，使用isp1362芯片开发的u盘程序，有助于usb开发的理解和ufi协议的理解。已经验证，完全可用xp自带驱动。-Collected online using Nios soft-core, use isp1362 chip development process u disk, usb help develop the understanding and agreement ufi understanding. Has been verified, fully available to bring their own driver xp.

控件注册问题 USBCLeaner自带控件与系统本身的控件版本不一致时会出现类似组件无法注册等提示,遇到这种情况,可以将prjXTab.ocx,COMCTL32.OCX复制到系统文件夹,XP一般是C:WindowsSystem32,NT一般是C:WiNNtSystem32下,然后 运行--Regsvr32 prjXTab.ocx Regsvr32 COMCTL32.OCX 一般就可以解决问题. -Control the registration of USBCLeaner own control and the control system itself will be different versions of similar components can not be registered, such as tips, encountered such a situation, can prjXTab.ocx, COMCTL32.OCX folder copied to the system, XP is usually C : Windows System32, NT is usually C: WiNNt System32 next, and then run- Regsvr32 prjXTab.ocx Regsvr32 COMCTL32.OCX general can solve the problem.

USB驱动源代码，3332-USB driver source code, 3332

usb carpet for descrive about usb driver

用于AVR的USB，工程，自己看看，怎么这么多废话，不过文件有点长-Interface USB with AVR microcontroller.

usbc测试软件,在各种操作系统都可以,比较好用,请适用 -usbc testing software, the various operating systems can be more convenient, please apply

温度显示器,用CYPRESS IC，有驱动，有源程序，有VB程序。-temperature display, use CYPRESS IC, a driver, source, a VB program.

包括了usb传输的集中协议，令usb的硬件开发成为过去.-including a focus on the transmission usb agreement, usb hardware development the past.

USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信 USB的枚举过程分为4个状态. 1.接入态 v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms) 2.默认态 v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR) v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS) 3.地址态 v主机从新的地址获取设备描述符(GET_DESCRIPTOR) v主机获取所有设备的配置描述符(GET_DESCRIPTOR) 4.配置态 v主机设置描述符(设备,配置) (SET_CONFIGURATION) v主机读取配置状态(可选) (GET_CONFIGURATION) v主机读取接口状态(可选) (GET_INTERFACE) -USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A