Basler SDK

kalman滤波，能够读取数据样本，并对下一数据进行滤波(kalman filtering, be able to read data samples, and the next data filtering)

说明：  伺服电机驱动器的原理图和DSP程序，是原厂的一手技术资料，成熟方案，对于研究伺服驱动器的有重大研究价值。(The schematic diagram and DSP program of the servo motor driver are the first-hand technical data of the original factory. The mature scheme is of great research value for the research of the servo motor driver.)

建立环状队列保存过去10个键盘状态，利用天然获得的时延，消键抖，防止连续动作，选择响应模式（下键或抬键动作）。还可以防止两键同按引起的误动作，这里主要靠键值识别，两键同下的键值与单键下键的值不同，拒绝之即可。(Create circular queue holds the state over the past 10 steps of the keyboard, using natural available delay, jitter elimination keys, to prevent the continuous action, select the response mode (the key or lift button action). You can also prevent the two key malfunction caused by the same, this is mainly identified by the key, two keys with one-touch keys with the following value under the key difference, the refusal can be.)

将一个正整数分解质因数。例如：输入90,打印出90=2*3*3*5。 程序分析：对n进行分解质因数，应先找到一个最小的质数k，然后按下述步骤完成： (1)如果这个质数恰等于n，则说明分解质因数的过程已经结束，打印出即可。 (2)如果nk，但n能被k整除，则应打印出k的值，并用n除以k的商,作为新的正整数你n, 　重复执行第一步。 (3)如果n不能被k整除，则用k+1作为k的值,重复执行第一步。 -Will be a positive integer decomposition of the quality factor. For example: enter 90, print out 90 = 2* 3* 3* 5. Program analysis: the decomposition of n quality factor, should be to find a smallest prime number k, then complete the following steps: (1) If the prime number exactly equal to n, is illustrated in the process of decomposition of the quality factor has come to an end, you can print out . (2) If n

操作系统的实验文档 包含设计与说明 带源码例子(Document contains the operating system design and description of experimental)

功能概要：构件化理解OUTCOMPARE编程 版权所有：苏州大学飞思卡尔嵌入式中心(sumcu.suda.edu.cn) 版本更新： 2012-10-12  V1.0        2013-02-02  V2.0        2014-04-16  V2.2 硬件说明：PORTB19=红灯；PORTB18= 绿灯；PORTB9= 兰灯； 1. 工程概述 (1)本工程为KL25微控制器无操作系统应用工程，OUTCOMPARE样例程序 (2)使用串口与外界通信，使用串口1，波特率为9600，1位停止位，无校验 2. 软件环境 (1)CodeWarrior v10.2/v10.3/10.5 3. 硬件环境 (1)KL25 SD13-01 EVB板 (2)兰灯对应引脚为PTB9 (3)串口发送引脚为PTE0，接收引脚为PTE1 4. 实验现象 (1)程序启动时串口发送Hello incap!，同时兰灯闪烁. (2)C1口输出10KHz的方波。采样频率设为20kHz。将C1引脚和A12引脚用导线连起来， (3)启动程序会观察到小灯在闪,即A12口输入捕捉到C1口打出的方波,在上升沿捕捉,当计数         值达到一定值时,小灯闪烁

奇异吸引子，混沌吸引子，复杂系统理论，画法代码。(Strange attractor, chaotic attractor, complex systems theory, painting code.)

SOCKET界面的编程，TCP程序的实现。(SOCKET interface programming, TCP program implementation.)

msp430和18b20的程序，是51改过来的(MSP430 and 18b20 procedure is changed over from the 51)

Program to Stack implement