􀋛 ht1632是一种显示驱动器，它广泛应用在数字时钟、温度计、湿度计等工业仪器仪表显示中，多片的使用方法在点阵式显示应用中尤为显著。ht163...

PIC16F877控制LED进行任何显示，该源码只做了北京两个字的显示-PIC16F877 to control LED of any revealed that the source only the word display in Beijing

本设计以P89V51RD2FN单片机为电动小车的控制核心，采用MSA-LD2.0倾角传感器实时测量跷跷板的倾斜角，用ST198光电传感器检测黑色引导线监测小车运动。光电传感器和倾角传感器模块把实时测量信号馈送至单片机，利用专用细分芯片TA8435H驱动步进电机，以脉宽调制式斩波方式对步进电机步进角进行细分，控制和调节小车速度。采用增量式PID控制算法确保小车能够达到平衡；用RT128×64M液晶显示时间、角度等参数。经测试表明：小车各项性能指标达到设计要求，能够实现30秒内小车行驶到规定点，并保持跷跷板平衡；在跷跷板一端配重可调整的情况下，小车也能自动找到平衡点并保持跷跷板平衡。-The single-chip design for the electric car P89V51RD2FN control of the core, the MSA-LD2.0 seesaw angle sensor real-time measurement of the tilt angle, the detection of black ST198 photoelectric sensor to monitor vehicle movement and guide lines.Photoelectric sensors and angle sensors in real-time measurement module to feed the signal to the microcontroller, using a dedicated sub-chip stepper motor driver TA8435H to PWM chopper-type stepper motor on the sub-stepping angle, control and regulation vehicle speed. The use of incremental PID control algorithm to ensure that the car can achieve balance with LCD RT128 × 64M time, angle and other parameters.After the test showed that: the performance car

单片机串行口的编程使用包括一些具体的设置-chuangxinkou

预期的源代码，包括驱动程序周围的ic代码，定标器。

C51编写的用ＩＯ脚模拟串口的源程序,供初学者参考-C51 prepared by serial IO pin analog source, the reference for beginners

不开销缓存RAM的430Flash读写程序-Do not spend the 430Flash cache RAM read and write procedures

atmel89c51cc03单片机的can通信，调试通过-atmel89c51cc03 SCM can communication, debugging through

友善臂开发板上使用的S3C2410，2.6内核的LCD驱动，源码包以及移植方法。-A friendly arm on the board used in the development of S3C2410, 2.6 kernel LCD driver, source packages as well as the method of transplant.

用于61单片机，内含大量的头文件，使用起来很方便-for 61 microcontroller, the first containing a large number of documents, was easy to use

关于51单片机控制595驱动的数码管程序，编译过，可直接使用，有HEX文件-51 single-chip 595 on control-driven digital control procedures, the compiler, and can be used directly, there are HEX file