液晶显示器与单片机接口电路程序，实现液晶显示对于信号源发生信号的控制和显示-LCD and microcontroller interface circuit procedures, LCD occurred signal source for the control signal and display

本文档是翻译后的ATMEL的8bit单片机atmega16l的中文数据手册，供参考-this document is the chinese spec of atmega16l

6位数码管显示的频率计，外部方波接到P3.4（T0），测试通过-6-bit digital tube display of the frequency counter, the external square wave received P3.4 (T0), the test

c8051f020中使用液晶lcd的程序，经调试通过。液晶采用fyd。-C8051F020 used in liquid crystal lcd procedures adopted by the debugger. LCD using fyd.

基于1602LCD的秒表，MCU STC89C51RC。-The stopwatch-based 1602LCD

信号滤波，使用在AVR. 串口接收数据格式 0xFFFF+数据位。-Signal filtering, the use of the AVR. Serial receive data format 0xFFFF+ Data bit.

PS2 读取键盘数具,非常好的一个软件PCB-PS2 keyboard to read a few, a very good software, PCB

SED1335驱动程序（LCD320*240）含GUI-SED1335 Driver (LCD320* 240) with GUI

系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节, 首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the second byte of cumulative variable, an increase in value per second.

iic工作子程序，用c51编写的我正在使用，献给诸位，改一下就可使用的有其他的需要联系我-work subroutine with c51 I was prepared to use, dedicated to you, change it can be used in any other links to the needs me!