arm7下面控制D12的程序源码，该源码在s3c44b0下通过测试。

波形发生器isotransferTARGET-waveform generator isotransferTARGET

Delphi USB 访问的单元的源代码。 -visit Delphi USB module source code.

LIBUSB USB的主机端驱动，很方便-LIBUSB USB host-side driver, it is convenient

为USB2.0最新的开发标准驱动程序,也是USB2.0芯片厂家重点定义的驱动程序,属于重量级的驱动-The latest development for the USB2.0 standard drivers as well as USB2.0 chip manufacturers focus on the definition of drivers, the drivers are heavyweight

arm7下面控制D12的程序源码，该源码在s3c44b0下通过测试。-ARM7 below D12 control procedures source, the source code under the s3c44b0 pass the test.

USB与USB互传文件的软件，能够实现PC机与另外一台PC机的文件传输-USB and USB to each other document software, can be achieved with another PC-a PC-File Transfer

USB通讯Slave FIFO,包含驱动。已经调试过了，可以用。-USB communications Slave FIFO, includes driver. Have been debug can be used.

usb与RS232之间的通信，包括主机程序，固件源程序。采用HID类！我现在需要USB键盘方面的源程序，如果你有请提供crzman@163.com-between USB and RS232 communications, including mainframe procedures, firmware source. Using HID category! I now need a USB keyboard aspects of the source, if you have please provide crzman@163.com

USB 源代码 ARM S3C44B0-USB source code ARM S3C44B0

这个程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件 名,并可显示 首文件内容,不过,该程序很不严谨,也没有任何错误处理,对U盘兼容性较差,只是用于简单试 验,作为参考. 这个程序可以支持WINDOWS按FAT16格式化的U盘,因为程序精简,所以只兼容超过50%以上的U 盘品牌,如果换 成CH375A芯片则兼容性可提高到85%,当然,如果使用WCH公司的子程序库或者正式版本的C源 程序兼容性更好-this procedure with 180 OK C code can read FAT16 file system drives the root directory, we can see the root directory under the file name, would show the first document, but the very stringent procedures, and there is no error handling, the U-poor compatibility, but for the simple test a post-mortem as a reference. this procedure can be supported by Windows FAT16 formatted U disk, because the procedure is streamlined and therefore only compatible with more than 50% of the U-brand, if chips were replaced CH375A compatibility can be increased to 85%, if the company"s use of WCH Subroutine Library or an official version of the C source better compatibility