X5045读写一体化C51程序包

基于51单片机的编程设计，资料的详细功能、包含内容说明-51 MCU programming based on the design, of detail features, including the content description

周立功LPC2200实验板第三章UCOSii的前两个实验-Week Ligong LPC2200 board UCOSii Chapter III of the first two experiments

本人用STC12LE5202AD做过的太阳能草坪灯LED充放电控制器，具有浮充，过充，过放，光控+时控等功能， 实际应用良好，希望大家多多指导。-I am done with STC12LE5202AD solar lawn lamp LED charge and discharge controller, with a float, over charge, over discharge, light control+ time control and other functions, the practical application of good, I hope you lot of guidance.

C8051F040 读FIFO数据并且通过串口发送至PC-C8051F040 read FIFO data sent through the serial port to PC

intel E1000类型网卡驱动源代码,目前在2.4的内核下支持82573的芯片不是很好,其他都不错-intel E1000 card type driver source code, currently in the 2.4 kernel to support the 82573 chip is not very good, other are pretty good

my code emmc this brief disscution

应用背景The CMX990 provides, on-chip: a flexible, formattable GMSK packet and freeformat modem, a dual synthesiser fed from an external source, IF and RF transceiver stages for both Rx and Tx modes, and auxiliary ADCs and DACs for system control and monitoring.关键技术Operating in the range of 400MHz to 1GHz at data rates of 4 to 16 kbps. This single-chip, half-duplex device requires a minimum of external components, keeping end-product board size, power consumption and cost to an absolute minimum. The versatile GMSK modem is configured for either packet and freeformat data operation via an efficient task-oriented Rx and Tx format and command structure combined with data scrambling, interleaving and FEC and CRC capabilities. Rx data acquisition, extraction and tracking functions use Rx data-quality feedback to support varying signal environments. IF and RF functions in the Tx path handle all the signal processing requi

MifareOne 卡片读写C代码。应用于酒店，家庭，公寓等场所。采用RC522模块。-Mifare one card type A read and write C codes.

embestLPC1788学习板ucosii移植源代码，已经移植好的，可以直接使用，添加自己需要的其他功能

linux下调用libjpeg库函数进行jpeg文件的解压(嵌入式Linux无GUI环境下进行开发)-linux under the libjpeg library function call to extract the jpeg files (no GUI for embedded Linux development environment)