以前在学校做设计，高

应用背景 VB写的控制程序，通过PC端上位机控制，在电路板上实现相应的演示效果。  VB write control procedures, through the PC side of the upper computer control, on the circuit board to achieve the corresponding demonstration effect. 关键技术首先 烧写程序到单片机   晶振 11.0592MHZ连接好串口线打开上位机软件 选择好COM端口  设置波特率为9600 First of all burn to write programs to chip crystal 11.0592Mhz serial line connection open PC software select the COM port to set the baud rate of 9600

jtag的安装源码和安装配置信息详细资料-JTAG installation source and install the configuration information details

LWIP stack updated version

一些常用串口的例子，希望对大家有帮助，里面有好几个源代码。-Examples of some commonly used serial port, in the hope that everyone has to help, there are several source code.

AM29lv160的编程代码-AM29lv160 programming code

Example USB-GPIF Project uVision3 CY7C68013 (Sypress) with shematic and driver WInXP

应用背景中央处理器嵌入式文件系统应用关键技术µC / FS是一个文件系统，可用于任何媒体可以为其提供基本的硬件访问功能。µC / FS是一种高性能库，对速度进行了优化，通用性和内存占用

CBM2090技术资料，硬件原理图，针脚说明，开发使用-CBM2090 technical information, hardware schematics, pin description, develop the use of

uClinux下的CAN总线控制器驱动程序源代码-uClinux under the CAN bus controller driver source code

基于LPC2148的UCOSII移植，带6个任务-UCOSII transplantation based on the LPC2148, with six mission