DVB软件,基于CT216软件的开发源程序.

uCOS-III+em5.22+VS2010的移植，包含了官光的GUI例子(uCOS-III em5.22 VS2010)

STM32F303的UCOS工程 支持硬件浮点运算 具有OLED屏显示 具有2路DA功能 具有AD采集(The STM32F303 UCOSII project Support floating-point hardware With the OLED screen display With 2 DA function With AD acquisition)

本文将指导读者一步步完成 LwIP 在 ADS1.2 开发环境下的移植工作，包括底层驱动的编写。本文使用的硬件平台是 AT91SAM7X256 + RTL8201BL(PHY)，至于软件平台，读者从本文标题即可看出。-This article will guide the reader step by step to complete LwIP ADS1.2 development environment in the transplant, including the preparation of the underlying drivers. This hardware platform is AT91SAM7X256+ RTL8201BL (PHY), As for the software platform, readers can see from the article title.

说明：  基于stm32f1的 ucosII开发手册 包含移植、代码讲解等(UcosII development manual based on stm32f1 Including porting, code explanation, etc.)

ucos2.52在msp430上移植-ucos2.52 transplant on the Controller

uc/os 嵌入式系统图形界面PC机模拟仿真工具-Tool for simulating uC/OS-II Graphics User Interface (GUI) on PC Windows environment.

说明：  MC9S12系统单片机， ucos操作系统移植(MC9S12 System Single Chip Microcomputer and uCOS Operating System Transplantation)

在ARM7和UC/OSII的平台上实现了GPS自动报站的功能,涉及GPS模块LEA_4S的驱动,位置速寻算法,语音芯片ISD4004的录放音驱动,LED页面管理等等.从启动代码到操作系统的移植以及到业务代码都有,是一个完整的项目代码.只要有相应的硬件平台就可以跑起来-In the ARM7 and the UC/OSII platform realize the GPS auto-stop function, involving GPS module LEA_4S driver, location-speed search algorithms, voice chip ISD4004 playback of audio drivers, LED page management. From the startup code to the operating system transplant as well as to the operational code has, is a complete code of the project. As long as have the corresponding hardware platform can run up

gprs uc/gui 实现的main文件...串口发送地图到ARM，LCD 显示地图程序，调试通过-gprs uc/gui realized main document ... serial send map to ARM, LCD display map procedures, debugging through

uCOSII的CPU移植Flash 非常直观(uCOSII CPU transplant very intuitive Flash)