精确到秒，上电后开始走表，按键K2选择调整位，闪烁后按键K1加，按键K2第四次回到现实状态...

单片机实时多任务交通控制程序。 包括ABSTRACT.TXT、GETLINE.C、README.C、SERIAL.C、TRAFFIC.C、等代码源文件-Single-chip multi-task real-time traffic control procedures. Including ABSTRACT.TXT, GETLINE.C, README.C, SERIAL.C, TRAFFIC.C, such as source code files

gsm短消息报警程序，与硬件配合，完成开关量输入，短消息通知主人，用于防盗报警系统。-Short Message gsm alarm procedures, and hardware with complete switch input, short message to inform the owner for the anti-theft alarm system.

《msp430应用系统开发典型实例》第9章程序代码- Msp430 typical examples of application systems development, Chapter 9 code

基于ARM中LPC2131芯片编写的各种uart源程序！-LPC2131 chips based on ARM in the preparation of a variety of uart source code!

系统采用52单片机作为系统核心处理器，通过串口手法图像数据，利用那个TR800最为GSM模块，接收和发送图片。-System uses 52-core processor as the system microcontroller via serial port means the image data, using that TR800 most GSM module, to receive and send pictures.

一个51单片机网卡的IP地址设置界面程序，供做一些网络设置的人参考．VB做的很简单-a 51 MCU IP address card interface set up procedures for some network configuration of reference. VB is very simple to do

pic单片机 DB4~DB7：在L CD中的作用，为数据线，DB0~DB2接地，DB3接高电平以完成对液晶的初始化。本Demo例子程序中，与单片机的RB2~RB5连接，用户使用其他的管腿时，只需修改#define部分。 RS为数据、指令控制线，与单片机的RB1连接，当RS为高电平时对LCD模块数据寄存器操作，当RS为低电平时对LCD模块指令寄存器操作； E为读写使能控制线，与单片机的RA5连接，每当E线向LCD模块发送一个正脉冲，LCD模块与单片机之间将进行一次数据交换； A、K分别是LCD模块背光的正负电源引脚，1-1所示，我们将用RC2控制背光，改变R29的值将改变背光亮度 R/W为读写选择线，在ICD2DEMO教学实验板中，R/W线接地，只做对LCD模块的写操作 -pic Singlechip DB4 ~ DB7: in the role of L CD for the data lines, DB0 ~ DB2 grounding, DB3 then high in order to complete the initialization of the LCD. Examples of this Demo program, with the single chip RB2 ~ RB5 connection, the user to use other s legs, simply amend the

AVR仿真器制做全过程,我已经成功做出两个,现在还在使用.里面有原理图,代码-AVR simulator system to do the whole process, I have successfully made two, and now are still using. There are schematics, code

这是控制变频器的西门子s7-200PLC程序-This is the control of Siemens frequency converter s7-200PLC procedures

电话拨号程序，开发环境：vc6.0,在win2k下调试通过。-Telephone dial-up procedures, development environment: vc6.0, in win2k adopted under the debugger.