stm32f107 工程模板+UART2+gpio

大巴车整车控制器程序 包括CAN通讯，与发动机ECU通信 基于PowerPC-bus TRUCK CAN controller procedures including communications, and communications engine ECU based on PowerPC

armboot 程序代码,供大家学习参考哦.不过我也是从网上下载的-armboot code for all to study reference oh. However, I also downloaded from the Internet

TQ2440A开发板的KEILMDK的裸跑测试例程，包括串口测试，液晶测试-TQ2440A development board to run test routines KEILMDK bare, including the serial test, liquid crystal test ..

hffmancode队列的插入删除处理 -insert delete hffmancode queue handle

ARM7202上通过JTAG烧录Flash的工具源代码，VC6.0下。-ARM7202 burning through JTAG tools Flash source code, VC6.0 under.

水箱自动控制系统，使用的是S3C44B0开发板-Automatic control system for water tanks, using a development board S3C44B0

用lpc2294实现can节点的设计,文中提供节点的初始化和收发程序-with lpc2294 node can achieve the design, text nodes provide the initialization procedures and transceivers

用DSP实现对4*4LED的控制程序，本程序已经在TMS320F2812上调试成功。-Using DSP to realize the 4* 4LED control procedures, the procedures have been successful in TMS320F2812 debugging.

Philips LPC2000 CAN驱动程序(包括3个示例)-Philips LPC2000 CAN Driver (including three examples)

这时最简单的一个程序，运行后，三个LED在闪，因为程序没有初始化串口，所以运行后超级终端没有反应-At that time the most simple of a process running, the three LED in flash, because the procedure did not initialize serial port, so after running HyperTerminal no response