单片机模块化编程

这个文件里面包含了51单片机以及protues的仿真实例100个，对于学习单片机和protues软件的仿真都会起到不小的帮助。希望能帮助到你们。

LPC23XX系列EMC工程文件加源代码，直接可用。-EMC Engineering Series LPC23XX file plus source code, can be used directly.

这时最简单的一个程序，运行后，三个LED在闪，因为程序没有初始化串口，所以运行后超级终端没有反应-At that time the most simple of a process running, the three LED in flash, because the procedure did not initialize serial port, so after running HyperTerminal no response

关于ADS7843的英文文档，，要求英文水平好，，要不搞不定-on ADS7843 English document, require a good standard of English, either forum

s3c4510原理图及其外围电路图！希望对大家有用！-Porting schematics and the external circuit! We hope to useful!

嵌入式单片机Tcpip代码。

ucosII在ARM7 LPC2104上的移植完整源程序, 可以在软件proteus上仿真. 说明: 1.应用实例为ArmUCOSApp est1 est.mcp,在周立功2104的扳子上 的ram中就可直接运行(code＋data

本文是我学习ARM开发以来的一些经验总结，以自己设计的S3C44B0X板为例，给出我调试开发ARM开发板的一些最基础知识。我只是在自己的开发板调试过并且经验有限，有些知识只能做为参考，不一定准确，就算给大家一个“例程”吧，如果大家有不同意见，希望多多指正！-ARM since learning some lessons learned, in their own design S3C44B0X an example, I presented the development and debugging of the ARM development board some of the most basic knowledge. I was only in their own development boards tuned and limited experience, some knowledge only as a reference, not necessarily accurate, even if everyone with a "routine" for the country, if we have different opinions, many correct!

STM32F2xx三重ADC设置的main.cADC的配置：三重交错带5cycles延迟到达6MSPS使用ADC1，ADC2，ADC3

uClinux上的应用程序设计对ARM芯片S3C44B0。-uClinux applications on the design of the ARM chip S3C44B0.