microcontroller serial input

8051F040的EEPROM程序，中断实现功能，可以移植到项目中。-8051F040 the EEPROM procedures, interruption of the realization of functions, can be transferred to the project.

利用单片机的定时器定时，令十字路口的红绿灯交替点亮和熄灭，实现主支路路口的交通信号灯控制（尽可能保持主线的畅通，即在通常情况下，保持主线的放行，只有在支线到达时，才放行支线），同时采用LCD显示倒计时时间及当前灯的状态-The use of MCU timer timing, so that the crossroads at the traffic lights turn out light and to achieve the main slip road junction traffic lights control (as far as possible the smooth flow of the main line, that is, under normal circumstances, to maintain the release of the main line, and only arrived at the branch only when the release branch), while using LCD display countdown time and the current state of light

Xilinx_Spartan3E开发板的常见疑难问题解答-Development board Xilinx_Spartan3E Common Troubleshooting

关于DDSＡＤ９８５０图和程序串口程序主控单片机ＡＤＵＣ８１２-on DDSAD9850 plans and procedures for the control procedures Serial MCU ADUC812

tcpip.rar 是一个51控制8019的程序,我已用于商用.还很稳定,有兴趣的可以看一下,对TCP IP UDP ICMP ARP RARP HTTP均可以实现.-tcpip.rar control is a 8019 51 procedures I have used the business. very stable, which is interested can look at it. TCP UDP ICMP IP ARP RARP HTTP are to be attained.

基于MCS51的小灯控制程序，里面有详细的注释，请多多指教-MCS51-based small-signal-controlled process, which has detailed notes, please advise

单片机与AD9851控制程序，可输出预置频率正弦波-With the AD9851 single-chip control procedures can be preset output frequency sine wave

1602+ds1302时钟显示+ds18b20温度报警，原理图，资料和源码。-1602+ ds1302 clock display+ ds18b20 temperature alarm

一个基于时钟芯片1302的单片机时钟。使用伟福的仿真器编译通过，同时写入单片机后的硬件电路也好使。-1302 based on the clock chip microcontroller clock. Wei-fu of the use of the compiler through the emulator, at the same time to write after the single-chip hardware circuitry or so.

MC9S12DG128B，包含了时间中断、光电检测、舵机控制、电机驱动、实时控制等功能。有相关注释。-MC9S12DG128B, includes a time interrupted, photoelectric detection, steering control, motor-driven, real-time control functions. Relevant Notes.