TMS320VC5509的dsp中断程序的map文件

录DEC6713的UART串口的测试程序。需要将板上的跳针JP3、JP5各自短接，将UART通道A 和通道B均配置为RS232方式。-Recorded in the UART serial DEC6713 test procedures. Need to jump on-board pin of JP3, JP5 their shorted to UART channel A and channel B are configured for RS232 mode.

wintech DAM 6416图像处理平台图像实时采集显示程序，支持pal，ntsc格式输入，复合视频信号输出-wintech DAM 6416 Image Processing Platform real-time image acquisition and display program, support pal and ntsc format input, composite video output

Protel99se开发平台下的硬质电路板DSP的usb仿真器工程原理图。-Protel99se development platform under the rigid circuit board DSP usb simulator works diagram.

定点的idct源代码,自己编写的,对有需要的朋友应该有帮助.-spot idct source code, prepared by himself, in need of friends should help.

TI54系列 关于dma的应用实例-TI54 series on the application dma

此程序实现用tms320f2812利用SPI模块，读写e2prom:AT25128,经测试可用，配置SPI模式，此程序素要注意的是，在读写外部存储器时，由于外设的速度限制，DSP的读写速度不能太快，否则无法完成，因此应尽可能读取外设的应答信号，或降低DSP操作时钟或加入相应延时。自己写的时候感觉这方面资料比较少，找了好久，现在成功了，把源码分享一下，希望对大家有用。

数控加工主轴转速，即在不同切深下所对应的主轴转速。-CNC machining spindle speed, that is, under different depth of cut corresponding to spindle speed.

tms320f2812 GPIO程序 基于DEC2812-tms320f2812 GPIO procedures based on DEC2812

CCS下编写的EDMA数据传输程序，基于DM642芯片-CCS prepared with EDMA data transfer procedures, based on the DM642 chip

SeedDM642平台，h263_loop为H263算法程序，包括了H263算法的压缩与解压-SeedDM642 platform, h263_loop for H263 algorithm procedures, including the H263 compression and decompression algorithms