多功能数据采集卡上位机完整代码，经调试后可用。

块交织的verilog代码--Verilog code for interleave.

3c2410的串口实验代码，还可以，可应用到工程上。-Serial Experiments 3c2410 code can also be applied to projects.

frequency meter mega8

这个程序是一个使用C语言编写的程序，是一个能够实现串口用printf形式输出内容的源程序。这个程序可以让你像printf一样输出内容

s3c2440bootloader vivi源码，用于启动嵌入式linux内核，-s3c2440bootloader vivi source, used to start the embedded linux kernel,

AVR ADC IN FREE RUNNING MODE WITH SOURCE CODE IN C

应用背景The CMX990 provides, on-chip: a flexible, formattable GMSK packet and freeformat modem, a dual synthesiser fed from an external source, IF and RF transceiver stages for both Rx and Tx modes, and auxiliary ADCs and DACs for system control and monitoring.关键技术Operating in the range of 400MHz to 1GHz at data rates of 4 to 16 kbps. This single-chip, half-duplex device requires a minimum of external components, keeping end-product board size, power consumption and cost to an absolute minimum. The versatile GMSK modem is configured for either packet and freeformat data operation via an efficient task-oriented Rx and Tx format and command structure combined with data scrambling, interleaving and FEC and CRC capabilities. Rx data acquisition, extraction and tracking functions use Rx data-quality feedback to support varying signal environments. IF and RF functions in the Tx path handle all the signal processing requi

TCP/IP 协议栈成功的在S3C44B0X 的实现。我从网上下的所谓在44b0x上运行的tcpip程序其实都是不能运行的，包括LWIP在44b0x代码。这个是我自己根据下载的代码经过努力的修改和调试得到的，程序稳定，TCP UDP ICMP web都得到很好的实现。os是UCOS-II.程序包里面有详细的程序演示说明-TCP/IP protocol stack S3C44B0X successfully realized. I am from the Internet under the so-called 44b0x running tcpip procedures are actually not running, including lwIP in 44b0x code. This is my own code under the download through efforts to modify and debug obtained, procedures stability, TCP UDP ICMP web have been very good to achieve. os is UCOS-II. package there are detailed procedures Demo Description

GPIO 示例应用程序为 Atmel AT91SAM7S64 （应工作与所有 AT91SAM 后最小的变化）。基于 Atmel Keil 环境为例。源与手臂精灵海湾合作委员会 （如 WinARM） 兼容。生成与 WinARM 4/05 和 6/06 测试，但应该用所有手臂精灵 gcc 工具链.[下载] (20060825 的时间戳、 makefile、 标题、 链接器脚本和包含的启动代码) 编译。

源码是基于Altera公司生产的FPGA开发板。该源码几乎囊括 了智能小车实现的每一部分。里面编写了L298N的驱动、超声波的驱动以及红外的驱动，并且里面有一些走迷宫的算法。该迷宫算法是基于左手法则的。