通过7路AD转换，结果存至相应存储单元

基于单片机的贪吃蛇的源程序的参考程序，很有用的哦-Snake-based microcontroller reference to the source program, very useful oh

基于UCM40的超声波测距函数,可测0.08---2.5米距离,数值精确-Based on Ultrasonic Ranging UCM40 function, measurable 0.08-2.5 m distance, numerical precision

有关的线路连接  GND – GND, VCC – 3.3V, CS – D8, CSN – D9, SCK – D10, MOSI – D11, MISO – D12, IRQ – D13 这个测试程序是发射端不断发送0x00到0XFF的数据给接收端

FS2410板的led驱动，测试代码及makefile-FS2410 board led drive to test the code and makefile

最新版IAR511下AT91SAM7S64的USB例程-IAR511 under the latest version of the USB routines AT91SAM7S64

U-BOOT-1.3.2移植到44B0X详细过程。内包含补丁和移植过程，可直接应用到系统上面。如果有问题可以直接与我联系。QQ：250008260-U-BOOT-1.3.2 ported to the detailed process 44B0X. Contains patches and transplantation process, can be directly applied to the system above. If you have problems can contact me directly. QQ: 250008260

windmanage 配置说明，用于对嵌入式系统的开发 近期有用-windmange for wind river

用ISD1700来实现读温度，比如27.5摄氏度，先分段录制声音：1,2,3,4,5,6,7,8,9,十，点，温度，摄氏度。读27.5摄氏度时，再分段找地址，读出相应的数-Reading used to achieve ISD1700 temperature, such as 27.5 degrees Celsius, the first sub-recording the voices of: 1,2,3,4,5,6,7,8,9, ten, point, temperature, degrees Celsius. Reading of 27.5 degrees Celsius, then find a sub-address, read out the corresponding number of

sharp flash blob 的烧写代码-sharp flash of burning blob of code

NIOS II UART 测试程序，使用的是周立功出的开发板，如果是自己的板子，只需配置引脚就可以使用-NIOS II UART test procedure, using a week Ligong a development board, if it is its own board, simply configuring the pins you can use