techorICE not used operating system debug source code S3C2410

LPC1788  I2c总线的应用，此例操作对象为温度传感器LM75，使用I2C0

移植uC/0S-II 到ARM系统，本课题要求详细了解uC/0S-II嵌入式实时操作系统的内核，分析如何将uC/0S-II移植到ARM系统上，并给出一个移植的应用实例。-Transplant uC/OS-II To ARM System

cs8900芯片的Linux驱动，用于Arm等运行Linux系统的嵌入式设备，该芯片是主流的网卡芯片，并且可以在此基础上轻松的移植到其他同型芯片上-CS8900 chips Linux driver for the Arm, such as running the embedded Linux system equipment, the chip card chips are the mainstream, and on this basis can be easily ported to other chips on the same type

欧姆龙PLC通讯程序源码.非常实用的通讯程序.-Omron PLC communication program source code. Very practical communication procedures.

应用背景C代码ATMEGA32为控制运动方向 写；步进电机，codevision软件使用Proteus仿真的援助。关键技术用Codevision  ； 软件；编写C代码，proteus软件进行模拟电路，可定制的用户界面软件进行程序的微控制器。

嵌入式Linux总结，可以说是一个小的心得体会。-Embedded Linux summarize, it can be said is a small experiences.

1．在发送端通过一个编码系统对待传数据预先编码，在接收端将传来的数据进行译码（复原）。对于双工信道（即可以双向传输信息的通道），每端都需要一个完整的编/译 码系统。 2．本程序的目的是大大提高通信的信道利用率，缩短信息传输时间，降低传输成本。 -1. In the transmitter through a coding system for pre-treatment data-coding the receiving end of data from the decoding (recovery). For dual-channel (two-way transmission of information can access), each side needs a complete encoding/decoding system. 2. The procedures are designed to greatly enhance the communication channel utilization, reduced transmission time, and lower transmission costs.

铁电存储器读写，I2C时序。适合工业用的存储器，本程序实现了底层驱动，读写以及部分文件系统。

24c08-24c31EEPROM初始化，读写，页读写源码程序。-24c08-24c31EEPROM initialization, read and write, page-source program to read and write.

飞思卡尔的键盘中断源代码,C语言写的,很不错的-Freescale keyboard interrupt source code, C language, and very good