microwindows上的修改的GUI，低层函数是microwindows的，上层有别人修改。...

FIC8120方案的 StartCell_Driver-FIC8120 program StartCell_Driver

在linux下利用QT4做的一个模仿烤箱的定时器，相当于烤箱的内置钟表-In linux using a QT4 do imitate oven timer, which is equivalent to the built-in oven clocks

esc/pos指令集的打印机的并口程序开发的演示源代码

可以写s3c2410 USB device的PC端USB驱动和程序-Can write s3c2410 USB device the PC-side USB drive and procedures

BeginningLinuxProgramming example2

程序是根据vidcat改的,只能抓PPM的图. makefile的内容如下,请注意打小写: cc=gcc #cflags=-i/firendly-arm/kernel/include -i/usr/local/arm/2.95.3/arm-linux/include -wall -dhave_libjpeg #-dvideo_dev="/dev/v4l/video0" -dversion="0.7.2" cflags=-wall -dvideo_dev="/dev/video0" -dversion="0.7.2" camsnap: camsnap.c 用法如下: camsnap -v -s 420x420 -o my.ppm 这儿请注意:s 的大小必需是8能整除的倍数. 这个程序我是在rh9下作的,需要交叉编译的朋友就把注释去掉,再给下面的注释就可以了.-Vidcat procedure is in accordance with the law, can only grasp PPM plans. Makefile reads as follows, please note that playing lowercase: cc = gcc# Cflags =- i/firendly-arm/kernel/include-i/usr/local/arm/2.95 .3/arm-linux/include-wall-dhave_libjpeg#-dvideo_dev =

Linux下，硬盘S.M.A.R.T相关工具-Linux, hard disk S.M.A.R.T related tool

三星2440的gpio驱动led的driver,对初学者大有帮助-s3c2440 gpio driver for led, very helpful for beginners

linux api手册进行linux编程必备-manual programming required linux

基于ARM+uClinux的嵌入式系统开发-Development on a flushbonding system ,which is based on ARM and uClinux.