完整的ＴＣＳ控制系统原程序．包含系统检测，数据采集（Ａ－Ｄ）与处理，通信和回路控制与检测．产品已上市．...

u盘固件源代码，很不容易找到的，分享一下-u disk firmware source code, is not easy to find and share

Avr_atmel_小型OS，编译通过。-Avr_atmel_ small OS, compiler through.

430成都技术培训会代码，使用IAR-4.10打开。-430 technical training in Chengdu will be the code, the use of IAR-4.10 open.

急救车与交通灯）（1）南北与东西方向，每个方面由红黄绿三个灯控制（2）南北向：　红（30秒），黄（5秒），绿（25秒）　　　东西向： 红（35秒），黄（5秒），绿（25秒）　　　上述基本参数可以根据实际情况自行调整，灯的变化规律与实际路口规律相同，绿灯在最后5秒钟时，黄灯亮，然后红灯亮，不允许两个方面同时亮绿灯。（3）绿灯的时间显示在数码管上进行显示。（4）可以通过一个开关控制，当开关信号为0时，整个交通灯全灭提高要求：（1）设计一个紧急控制开关信号，当紧急开关信号为1时，两个方向的灯全为红灯。紧急开关撤消后，按照开关按下之前的状态继续运行（其参数要保存）。（2）设计一个夜间行车开关，当开关按下后，两个方向都只有黄灯闪烁，其它灯熄灭。（3）设计两个方向的亮时时间可调。-emergency vehicles and traffic lights) (1) North and South and east-west direction, each with three yellow-green from red lights control (2) to the north and south : red (30 seconds), yellow (5 seconds), Green (25 seconds) to things : red (35 seconds), yellow (5 seconds) Green (25 seconds) above basic parameters can be adjusted to the actual situation, the light changes with the actual law of the same intersection, the green light in the final five seconds, the yellow light is on, and then a red light, bright, not two fronts simultaneously bright green. (3) the green light at the time displayed on the digital display control. (4) can be controlled by a

热敏打印机AT指令，相对比较全，是开发人员参考的宝贵资料。-Thermal printer AT commands are relatively wide, a developer reference to valuable information.

我用VC写的十进制与十六进制数的转化程序，绝对独创，可用于需要浮点运算的单片机编程数值转化。-I write with VC metric hexadecimal number and the conversion process, absolutely original and the need for the floating-point operations into numerical microcontroller programming.

Atmega8和MCP2515实现CAN通讯源码代码,测试通过，希望对大家有用-CAN communication Atmega8 and MCP2515 to achieve source code, test and hope for all of us

学习430单片机的必备东西，超经典，一步一步教你学会430单片机IAR开发工具。-430 single-chip learning essential things, ultra classic, learn to teach you step by step, 430 single-chip IAR development tools.

ARM入门初级基础,主要对ARM 学习有个初步了解和认识,即使没接触过单片机的人也可以轻松学习-ARM entry-primary basis, mainly on the ARM to have a preliminary understanding of learning and understanding, even if did not come into contact with SCM can easily learn

PIC单片机无符号数运算子程序,可以直接调用!-PIC unsigned few Operational subroutine can directly call!