LPC2103,74HC164，IAR下程序

ATmega16数码管实验基数显示，数码管选通输出在前避免了字码在前产生的乱码，Proteus图-ATmega16 base of digital tube experiments showed that the digital control of strobe output of the former to avoid the code generated by the previous garbled, Proteus map

红外线接收程序,本程序运行在NEC制下的遥控器下-Infrared receiver program, the program is running in the NEC remote control system under

Woltomierz dla AVR. Przyklad jak stworzyc woltomierz na platformie AVR

用AVR单片机实现的乐曲编码程序，使用C语言写的-with AVR MCU music coding procedures, the use of the C language to write

MEGA16 驱动开发板上的继电器,按不同的独立键，交替改变继电器开关状态-mega16 drive PWM

内容：1、本程序用于测试4相步进电机常规驱动 2、需要用跳帽或者杜邦线把信号输出端和对应的步进电机信号输入端连接起来 3、速度不可以调节的过快，不然就没有力矩转动了 4、按s4（设置成独立按键模式）可以控制正反转 -Contents: 1, the procedure used to test the four-phase stepper motor-driven two conventional, need to jump cap or the signal output line of DuPont and the corresponding stepper motor signal input terminal connected three speed adjustment can not be too fast, Otherwise, there would be no moment of rotation of the four, according to s4 (set to form an independent key mode) can control the positive inversion

89C2051 + 4-digit 7-SEG led + 4-key switch c源代码-89C2051 4-digit 7- SEG led 4-c switch key source

模拟交通灯，并带有数字显示的程序。初始时全为红灯，显示“HELLO”字样。然后交通灯以“红绿、红黄、绿红、黄红”四种状态做循环，而且黄灯会闪烁，每种状态都带有到数记时。当按下P3_2时，变成“红红”状态，并显示“STOP”字样！ -simulated traffic lights and figures with the procedure. When all of the initial red, shows that the "hello" words. Then traffic lights to the "black, red and yellow, green, red, yellow red" state to do four cycle, but the yellow light flashes, each state will have a few to remember when. When pressed P3_2, into a "red" state, and shows that the "STOP" word!

6029lcd驱动显示程序,直接可以运用的-6029lcd drive display program, could be used directly