基于ARM的应用Source3，在网上找到的源码，分六个，这个是3

AVR 单片机IIC程序 包含启动位，停止位，应答检测，非应答检测，单字节发送，单字节接收，GCC编写，

实现在STM32上无需操作系统 裸机硬件上实现WIFI PING通

2410各功能口驱动！与大家分享 2410各功能口驱动！与大家分享-I drive the 2410 feature! 2410 to share with you the various features I drive! To share with you

ARM9内核的philip公司的LPC3180初始化SDRAM的驱动代码-ARM9 core philip

EasyARM2131开发板源码之一-----------2．GPIO输出实验－单路LED控制-EasyARM2131 one source development board----------- 2. GPIO output experiment- one-way LED control

采集AIN0和AIN1的信号，通过可调电阻，使输入的模拟信号发生改变，来进行A/D转换。为保证数据的准确性，通常采集10次以上，在求平均值。A/D转换器采集AIN0和AIN1的信号,并显示出来。-AIN1 acquisition and AIN0 signal, through an adjustable resistor, so that the analog signal input to change, to carry out A/D conversion. In order to ensure the accuracy of the data is usually collected 10 times more than the average in the order. A/D converter and acquisition AIN0 signals AIN1 and displayed.

TDS510仿真器 的硬件电路和软件VHDL代码和大家共享.有兴趣可以自己动手做-TDS510 circuit emulator hardware and software VHDL code and everyone shared. Who are interested can make their own

lpc2131 IAP在线升级演示程序，升级方式为UART。-lpc2131 IAP-line demonstration program to upgrade, upgrade to UART.

2410 example for calc

针对硬件操作，示例为并口直接对ARM的FLASH芯片进行修改-against hardware operation, the sample directly to the parallel port on the ARM chip changes FLASH