这是一个基于凌阳单片机SPCE061A的GPS定位仪c代码

DAC0832的DA转换ASm汇编子程序-The DA converter DAC0832 subprogram compilation ASm

基于51单片机动态显示数码管,及中断说明等-51 MCU-based dynamic display of digital control

8051-adc0804

单个数码管循环显示０～９，在KEILC环境下编译调试成功-A single cycle of digital tube display 0 ~ 9, in the circumstances KEILC successful compiler debugging

远程遥控家电，用到了串口程序，键盘程序，LCD显示程序等等，非常不错的程序。比较有参考价值。-Remote control home appliances, use a serial process, the keyboard program, LCD display program, etc., are very good procedures. Have reference value for comparison.

STR7 USB Library Source code

基于中断控制的声光报警器的设计.采用中断方式，设计一个声光报警器的硬件电路和控制程序。程序运行时，一旦8位开关信号量状态满足设定条件，就触发中断，使发光二级管按规律闪烁，同时扬声器播放一段音乐。 硬件设备包括一台微机、一个MFID微机实验箱、一块T型板，2输入四与门 74ls08、8位总线驱动器 74ls245、LM386A音频放大器、排阻、扬声器各一个，发光二极管8个，470uF电容2个、104电容4个，插线若干。 -Interrupt-based control of sound and light alarm design. Using interrupt mode, designing a sound and light alarm hardware circuits and control procedures. The program is running, once the 8-bit switch signal to set the amount of state to meet the conditions to trigger interrupts, so that light-emitting diode flashes according to the law, while speakers play a piece of music. Hardware includes a computer, a computer simulation, MFID box, a T plate, 2 input 4 and gate 74ls08, 8-bit bus driver 74ls245, LM386A audio amplifier, exclusion, speakers of a light-emitting diode 8, 470uF capacitor 2 a, 104 capacitors 4, plug-line number.

8051控制步进电机（小车的源程序-8051 stepper motor control (the source Trolley

mega16,驱动开发板上的独立按键，按下不同的键，数码管显示0-3四个数字-MEGA16 KEY

步进电机控制,LCD显示-Stepper motor control, LCD display