5615的使用,即TLC5615头文件,谢谢各位下载啊

MAX7219用于键盘控制和led控制的专用芯片，对于初学者有很大的帮助。-MAX7219 uses in the keyboard control and the led control special-purpose chip, has the very big help regarding the beginner.

单片机IO口直接驱动液晶屏演示程序，方便更改-Single-chip IO port directly drive LCD demo program to facilitate change

nn modelling and auto-pid controller

MCS-51单片机有5个中断源，其中两个是由-INT0、-INT1引脚输入的外部中断源；另外三个是内部中断源即由T0、T1的溢出引起中断和串行口发送完一个字节或接收到一个字节数据引起中断。触发外部中断有两种方式，即下降沿引起中断或低电平引起中断。当编程TCON中的ITi（i=0、1）为1时，则引起触发的方式为边沿触发方式，反之(ITi=0)为低电平触发方式。每个中断源的中断请求能否得到响应要受两级“开关”的控制，即一个总“开关”-MCS-51 single-chip has five interrupt sources, two of which are by-INT0,-INT1 pin input external interrupt source the other three internal interrupt sources from the T0, T1 overflow caused by the disruption and serial port sending or receiving end of a byte to a byte of data caused by interruption. Triggered external interrupt has two modes, namely, falling edge or low-level disruption caused disruption caused. When programming TCON in ITi (i = 0,1) for the 1:00 has been the subject of a way to trigger the way to the edge of the trigger, on the contrary (ITi = 0) for low-level trigger mode. Each interrupt source interrupt request can be subject to levels in response to

关于CPU卡最浅显易懂的介绍资料，内容详尽，适合对CPU卡所知甚少的新手阅读。-On the CPU card of the most easy to understand introduction to the information, content, detail, suitable for CPU card little was known about the novice to read.

实时时钟芯片DS1302的C51程序-real-time clock chip DS1302 the procedures C51

单片机控制LCD驱动芯片UC1601S驱动程序，点亮液晶屏，显示字符，并上下滚动，已通过测试-SCM control LCD driver chips UC1601S driver lit LCD screen, display characters, and scroll up and down, has been tested

12864最权威的资料，两个资料一起组成完整资料-12864 most authoritative information, with information on the composition of two incomplete information

8*8点阵LED显示器的设计 并且有原程序和说明 很好的-8* 8 dot matrix LED displays and the design of the original procedure and a good note

很好的源代码,x250汇编源码,X250读写功能,-good source code, compile source SCH-X250, SCH-X250 features,