英特尔PXA255芯片的中文资料，整个芯片的绝对的细节，如…

这是S3C2410处理器外接EEPROM对I2C编程的范例-This is the S3C2410 processor external EEPROM programming of I2C example

nor flash write and read

多周期处理器--verilog写的,欢迎大家来下载，-multicycle microprocessor written with verilog HDL

ADC0808的PWM实验，有proteus仿真图和C程序。-ADC0808 of the PWM experiment, there proteus simulation map and the C program.

ARM体系结构资料文档，如何开发ARM的步骤和方法。-Information on ARM architecture, documents, how to develop ARM-steps and methods.

s3c2410pcb制作，方便进行arm硬件开发同时能提供多层板制作经验-s3c2410pcb production, to facilitate hardware development arm at the same time can provide experience in the production of multilayer

步进电机是将电脉冲信号转变为角位移或线位移的开环控制元件。在非超载的情况下，电机的转速、停止的位置只取决于脉冲信号的频率和脉冲数，而不受负载变化的影响，即给电机加一个脉冲信号，电机则转过一个步距角。-Stepper motor is the electrical impulse signals into angular displacement or linear displacement of the open-loop control components. In the non-overload case, the motor speed, and stop location depends only on pulse frequency and pulse number, regardless of the load change, that is, to add an electrical pulse signal, then turn one motor step angle.

对ucos-ii在ARM7上移植的动画解释 内容很生动，对移植ucos2 很有帮助-powerpoint_of port ucos2 this powerpoint is very nice read it and port ucos2 to arm7

使用AIN0和AIN1测量两路直流电压，并将结果通过UART0想PC机发送。-compute and the use of two-way con measuring DC voltage, the results through UART0 sent to PC.

代码用简单的4个IO口外加两个ADC转换接口实现了触摸屏全套控制流程.-Code with a simple four IO port plus two ADC conversion of the touch screen interface to achieve a full set of control flow.