Based on the Nucleus operating system, a GUI interface, can be very convenient t...

智能楼宇自动控制系统-Intelligent Building Control System

Linux下的以太网驱动，很不错，内容挺多，支持嵌入式。大家交流用。-Ethernet driver under Linux, it is true that the contents of挺多to support embedded. Used to facilitate the exchange.

如果LDE1与LDE3亮则SPIflash读写正常 如果你接上串口线，可通过上串口调试助手查看读写的信息

embestLPC1788学习板ucosii移植源代码，已经移植好的，可以直接使用，添加自己需要的其他功能

Linux内核裁减 （1）安装module-init-tools-3.0.tar.gz:  (2)安装modutils-2.4.25-8.9.i386.rpm:  （3）安装新内核:  请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报

钱能的C++程序设计教程（第二版）源代码-the C++ Programming Guide (Second Edition) source code

44b0x得内存配置方法-44b0x in Memory Configuration

本文为采用VHDL编写的程序及报告。步骤如下：1设计三位二进制计数器程序 二:设计一驱动循环显示7位数字 2编写LED控制程序如下： 3设计采用原理图方式如下: -VHDL paper prepared for the introduction of procedures and reports. Steps are as follows : Design of a binary counter three two procedures : Design of a drive cycle show seven figures prepared two LED control procedures are as follows : three designs diagram as follows :

TMS320F28335 eCAN BUS 發出程式,已在德州儀器的開發板測試通過!!

单片机与LCD1602，有原理图及源程序，程序在KEIL中调试过，并在PROTEUS中联调通过 -SCM and LCD1602, are schematic and source code, procedures have been in the KEIL debug and FBI adopted in PROTEUS