好不容易才找到的。是基于X86的汇编代码。 仅供学习或查找使用。...

uCOS2.76移植到s3c44b0x上，平台是ADS1.2,另作了外部中断的移植，测试通过。-uCOS2.76 s3c44b0x transplant, the platform is ADS1.2. another made external interrupt the transplant, the test.

说明：  Micrium-uCOS3-LPC1768

ucos-ii-gcc UCOS-II在AVR单片机上的应用 利用GCC开发环境-CENTER-ii- gcc UCOS-II in the AVR on the use of GCC Application Development Environment

lwip,ucos-ii在44b0上的实现-lwip, ucos-ii in the 44b0 realize

uCOS 下LCD的驱动控制,完全源码,放心使用-for uCOS LCD driver under control, complete source code, the use of confidence

ucgui3.90原吗,有memdev部分,支持彩旦-ucgui3.90 the original right, has memdev part, support彩旦

这次发个ucos270的time，其他代码我会陆续发送，请等待-The fat ucos270 of the time, other code I would have sent, please wait

1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示； 2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别 产生1s的定时时间，将时间分别显示到数码管上； 3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display (2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively, Produce the timing of the 1s, the time display to the digital control External PS/2 keyboard, the key value of displayed through the serial port to a PC.)

这次发个ucos270的flag，其他代码我会陆续发送，请等待-The fat ucos270 of the flag, other code I would have sent, please wait