based on the ARM for uCOS

uCOS-II向三星S3C44B0x处理器的移植源代码.

uCOSII276源码给想要早些版本的XD-uCOSII276 source to want to earlier versions of the XD

主要实现功能： 1 tcp server并发（主要涉及文件app_lwip.c、app_tcp_server.c） 2 网线热插拔（主要涉及文件app_lwip.c、app_tcp_server.c） 3 不重启修改ip地址（主要涉及文件app_lwip.c、app_tcp_server.c、app_key.c（按键修改ip地址）） 4 将lwip的数据接收从中断方式改成单独的接收任务方式（主要涉及文件app_lwip.c） 5 usb串口信息打印（115200波特率） 6 注意：使用的stm32的HAL库而不是标准库(The main functions are: 1 TCP server concurrency (mainly related to file app_lwip.c, app_tcp_server.c) Hot plugging of 2 network lines (mainly related to documents app_lwip.c, app_tcp_server.c) 3 do not reset the IP address (mainly related to file app_lwip.c, app_tcp_server.c, app_key.c (key modify IP address)) 4 change the data reception of LwIP from the interrupt mode to the individual receiving task (mainly involving the file app_lwip.c) 5 USB serial port information printing (115200 baud rate) 6 note: the HAL Library of the STM32 used instead of the standard library)

移植到MCS51的uCOS_II的串口程序。-transplanted to the MCS51 uCOS_II Serial procedures.

C++程序源代码 在ucos_ii基础上加上网络功能，串口调试， 在vc6.0 + masm.611下编译通过，该软件仅供学习使用。 建议你在学习该软件的使用，首先先大致浏览一下ucos_ii的相关内容-C source code based on the ucos_ii with network function, serial debugging, the compiler under vc6.0 masm.611 passed, the only learning to use the software. I suggest you study in the use of the software, the first to broadly glance at the relevant content ucos_

在ZLG的LPC211X开发板上没有D12 USB驱动的源程序，自己从LPC2210开发板上更改后的源程序，可以供大家参考。 文件： Usb.HEX Usb.mcp 等相关文件。-ZLG

在网上好不容易找到的有关ucos移植到gba上的代码，有需要的可以下载看看，有关内容可以和作者联系-the Internet is not easy to find the relevant CENTER transplant impressions on the code, the need to be able to download a look at the contents and the author can be linked

此例程运行于内RAM > 1024 Byte的51内核的单片机即可。 比 如 ： SST89E564RD ,STC89C516RD 等 移植ucosii，本例程一共创建了3个任务，任务一开led1,任务二开LED2，任务3关闭led1和led2，并且运行到相应的任务，串口会打印出来，提示当前系统运行的状态。(This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running. This routine runs on a single chip computer with 51 cores of RAM > 1024 Byte. For example, SST89E564RD, STC89C516RD and so on For uCOSII, 3 tasks are created in this routine, the task is LED1, task two opens LED2, task 3 closes LED1 and LED2, and runs to the corresponding task, the serial port will be printed out to prompt the state of the current system running.)

UC/OS2在2104的移植原代码，《16K(UC/OS2 transplant in 2104 the original code, "16K)

mcf522xx EV板的驱动程序源码，可以直接使用。该驱动本人测试过。-mcf522xx EV Board driver source code can be used directly. The driver I tested.