linux 下的人脸识别代码，编译的时候需要配置好IDE

AirFart监听 802.11流量，并实时报告它所监听到的所有无线设备的串行信号的强度，这些信息在一个基于GTK的GUI中显示。AirFart需要安装linux-wlan-ng项目。-AirFart eavesdropping 802.11 flow, and real-time reporting it to monitor all wireless devices serial signal strength, the information in a GUI based on the GTK displayed. AirFart need to install linux-wlan-ng project.

程序是根据vidcat改的,只能抓PPM的图. makefile的内容如下,请注意打小写: cc=gcc #cflags=-i/firendly-arm/kernel/include -i/usr/local/arm/2.95.3/arm-linux/include -wall -dhave_libjpeg #-dvideo_dev="/dev/v4l/video0" -dversion="0.7.2" cflags=-wall -dvideo_dev="/dev/video0" -dversion="0.7.2" camsnap: camsnap.c 用法如下: camsnap -v -s 420x420 -o my.ppm 这儿请注意:s 的大小必需是8能整除的倍数. 这个程序我是在rh9下作的,需要交叉编译的朋友就把注释去掉,再给下面的注释就可以了.-Vidcat procedure is in accordance with the law, can only grasp PPM plans. Makefile reads as follows, please note that playing lowercase: cc = gcc# Cflags =- i/firendly-arm/kernel/include-i/usr/local/arm/2.95 .3/arm-linux/include-wall-dhave_libjpeg#-dvideo_dev =

arm9的bootloader,适合通用2410x平台 vivi.pal(20051228)支持tv输出和vga输出，vclk为26.25mhz vivi(20060330)支持vga输出和tv输出，vclk为25mhz 以上两个vivi均编译自vivi-br-release(20051228).tar.gz 在两个不同vivi间切换的方法是在源文件“/include/platform/smdk2410.h”中打开或者取消对PAL640480宏的定义： #define PAL640480 默认该句是注释掉的，编译得到的vivi的vclk为25mhz ch7005手册中要求640x480的pal输出时vclk为26.25mhz，但实践中发现并不需要完全等与这个频率，有时候vivi(20051228)的pal效果更好，具体使用哪个参数用户可以多比较尝试，也可以尝试修改成其他的频率。-arm9 Bootloader, Definitive 2410 x suitable platform vivi.pal (20051228) support tv vga output and losers that vclk to 26.25mhz 14:57 (20060330) support tv vga output and exports, vclk for more than two 25mhz were compiled from 14:57 14:57- br-release (20 051,228). tar.gz 14:57 in the two different ways of switching between the source document "/ incl. ude/platform/smdk2410.h "open or cancel right PAL64048 0-definition :# define default PAL640480 comment out of the sentence. Compiling the 14:57 of the vclk 25mhz ch7005 manual requirements 640x480 p al output when vclk 26.25m

一个管理网络电视资源的QT界面。MagicLinux ＋ QT4 编译完成-A management network television resources QT interface. MagicLinux QT4 compile complete

embedded xLinux root 5.4

这是嵌入式中的FPGA的驱动，用在内核驱动，希望有帮助-This is embedded in the FPGA-driven, core drivers in the hope that has helped

自平衡2叉树，数据结构中自己写的一个自平衡2叉树-Since the balance of 2-tree

这个程序是网卡Broadcom 5705M的linux的驱动-The program is the driver for networok card Broadcom 5705M in linux system.

linux设备驱动开发，清晰版本第三版，非常适合LINUX开发驱动使用-linux device driver development, a clear version of the third edition, is ideal for the development of drivers to use LINUX

linux源代码分析-linux source code analyzes