51单片机的 中文拼音输入法 c源程序~

三路红外线探头控制ISD2560语音播放。主要原理是正常情况下三对红外线接收管接收到各自配套对应的红外发射管的红外线，属于正常检测状态，一旦有一路红外管信号被隔断，侧启动语音芯片程序，播报警示提醒语音或报警。三对红外管可以根据使用需要，设置搭配报警程序。可用于各种排队系统。-three-way infrared probe control ISD2560 voice broadcast. The main principle is that under normal circumstances receive three pairs of infrared receiver to control their own matching the corresponding infrared emission of infra-red and is a normal state of detection, if there is way infrared control signals are cut off, side launched procedures voice chip, broadcast a warning to remind voice or alarm. Three pairs of infrared tube can be used, the police procedures set match. For various queuing system.

avr单片机开平方的程序-avr SCM open square procedures! !

本程序将指定的显示缓冲区送显，并将读取的键值送显。 入口参数：显示缓冲区首地址在SADR中,要显示的位数在CNT中。 出口参数: 无。-This procedure will be sent to the designated display buffer significantly, the key will be sent to a significant reading. Entrance parameters: the first address in the display buffer SADR, it is necessary to show that the median of the CNT. Export parameters: None.

基于AVR ATmega32 单片机的DS1820驱动程序 基于winavr 平台编译 -ATmega32 based AVR MCU DS1820 driver-based winavr Taiwan compiler

在PROTEUS仿真实现，在液晶显示器上显示采集温度的波形图-In the PROTEUS simulation, in the liquid crystal display to show temperature waveform acquisition

这是TI提供的有关msp430的uart的各种配置例程，用户稍作修改就可以用作自己的程序-This is provided by the TI

HT1622头文件，HT1622液晶显示模块底层函数 -HT1622 header files

单片机控制的图文屏，采用12864液晶显示，并有时钟芯片提供时间。液晶显示可以显示图和文字。-SCM graphic screen, liquid crystal display used 12864, and has provided the time clock chip. LCD can display maps and text.

CPU: ATMega32 频率： 8.0MHz 编译器：CodeVisionAVR 1.24.8c-CPU: ATMega32 frequency: 8.0MHz compiler: CodeVisionAVR 1.24.8c

本程序介绍了msp430的按键程序，对初学者很有用！-This procedure introduced the MSP430 keystroke procedures, useful for beginners!