C－51开发D12固件编程指南，里面有关于协议描述符的流程以及固件的源码。...

usb驱动及接口通信的汇编版本-usb drive and communication interfaces version of the Compendium

检测usb的U盘的盘符-usb detection U disk drive

使用68013的测试程序，包含68013固件程序（采用slave FIFO bulk同步读写，EP2 OUT，EP6 IN），驱动，PC端测试用程序。CPLD的VHDL代码-Test procedures for the use of 68,013, including 68,013 firmware (using the synchronous slave FIFO bulk read and write, EP2 OUT, EP6 IN), driver, PC-side test procedures. VHDL code of CPLD

演示CY7C68013如何接受OUT包的源程序-Source code to demo how CY7C68013 to receive OUT packege.

一些USB驱动的英文资料，我没看懂，哈哈，希望提供给有用之人-Some USB-driven information in English, I did not understand, want to provide a useful person to the

应用程序调用USB驱动程序-Application programming transfered USB driver

This project attempts to stream high-speed ADC (or other digital) samples into a computer equipped with USB 2.0 CY3681FX2 AD9245

波形发生器bulktransferloader-waveform generator bulktransferloader

针对USB 设备或主机开发过程中的调试过程，如果能对协议的过程和细节内容了解地非常清楚，则对于调试过程非常有帮助，就意味着可以预测主机（或设备）下一步应该做什么，此文档目的在于描述控制传输和批量传输的协议细节。-USB device or host

这个程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件名,并可显示首文件内容,不过,该程序很不严谨,也没有任何错误处理,对U盘兼容性较差,只是用于简单试验,作为参考.这个程序可以支持WINDOWS按FAT16格式化的U盘,因为程序精简,所以只兼容超过50%以上的U盘品牌,如果换成CH375A芯片则兼容性可提高到85%,当然,如果使用WCH公司的子程序库或者正式版本的C源程序兼容性更好-this procedure with 180 OK C code can read FAT16 file system drives the root directory, we can see the root directory under the file name, would show the first document, but the very stringent procedures, and there is no error handling, the U-poor compatibility, but for the simple the pilot, as a reference. this procedure can be supported by Windows FAT16 formatted U disk, because the procedure is streamlined and therefore only compatible with more than 50% of the U-brand, if chips were replaced CH375A compatibility can be increased to 85%, if the company"s use of WCH Subroutine Library or an official version of the C source better compatibility