通用串口总线

Usb2.0原码及其详细资料,包含USB2.0详细资料及调试助手代码。-USB2.0 original code and its detailed information, including detailed information on USB2.0 and debug the code assistant.

用CY7C630芯片做USB转串口的汇编原程序,里面有编译生成的hex文件.写入芯片就可使用.最高波特率为24-do with CY7C630 chip USB to Serial compilation of the original procedure, which has compiled documents generated hex. The chips can be used. The highest baud rate for 24

arm7下面控制D12的程序源码，该源码在s3c44b0下通过测试。-ARM7 below D12 control procedures source, the source code under the s3c44b0 pass the test.

这个程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件 名,并可显示 首文件内容,不过,该程序很不严谨,也没有任何错误处理,对U盘兼容性较差,只是用于简单试 验,作为参考. 这个程序可以支持WINDOWS按FAT16格式化的U盘,因为程序精简,所以只兼容超过50%以上的U 盘品牌,如果换 成CH375A芯片则兼容性可提高到85%,当然,如果使用WCH公司的子程序库或者正式版本的C源 程序兼容性更好-this procedure with 180 OK C code can read FAT16 file system drives the root directory, we can see the root directory under the file name, would show the first document, but the very stringent procedures, and there is no error handling, the U-poor compatibility, but for the simple test a post-mortem as a reference. this procedure can be supported by Windows FAT16 formatted U disk, because the procedure is streamlined and therefore only compatible with more than 50% of the U-brand, if chips were replaced CH375A compatibility can be increased to 85%, if the company"s use of WCH Subroutine Library or an official version of the C source better compatibility

some examples of LED display vir EZUSB

window的驱动编写入门，以及usb的相关资料-the preparation of entry-window of the driver, as well as relevant information on usb

VB编写的USB源码，用于USB的设备的驱动-VB prepared the USB source code for the USB device driver

some examples of EZUSB s POR menagement

USB开发固件程序详细.-USB firmware development process in detail.

用于AVR的USB，工程，自己看看，怎么这么多废话，不过文件有点长-Interface USB with AVR microcontroller.