2410、广告环境下的UART通信例程

一款低价位时钟芯片的C驱动程序-low-priced clock chip C Driver

用于无感无刷直流电机调速的电子调速器驱动程序。基于ATmega8单片机，使用C语言开发，此版本是基于MK电调程序最新版本0.42开发。源程序分为电调上电自检，电机启动，反电动势过零检测，IIC、PPM、串口信号接收，电流测试，电调地址设定等功能。是一个完善可以的电调驱动程序。

arm_ads－44B 程序原代码，适合嵌入式开发的调试工作学习。-arm_ads-44B program source code, suitable for debugging embedded development work and study.

该压缩包为ARM S3C44B0的源代码，含有5个程序。分别为按键控制LED,PWM脉冲宽度调制,RTC实时时钟，UART串口通信，DMA直接内存存取等5个实验的源代码。代码以C语言为主，辅以部分ARM汇编指令。该实验开发平台为S3C44B0板，开发工具为ADS1.2.-The package for the ARM S3C44B0 compression source code, which contains five procedures. Were keys to control LED, PWM pulse width modulation, RTC real time clock, UART serial communication, DMA direct memory access, such as five experiments the source code. Code to C language, supplemented by some ARM compilation directives. The experimental development platform for S3C44B0 boards, development tools for ADS1.2.

C51单片机下，PS2的实现源码，用C语言写的。绝对可用-C51 under SCM, PS2 implementation of source code, written using C language. Absolutely free

用STC89C58单片机做的数据采集和控制，12位AD转换使用TLC2543，通讯协议采用MODBUS（RTU），通过拨码开关改变从机地址，支持模拟量或数字量的读写。（4路模拟量输入、6路开关量输出（继电器输出）、8路开关量输入） 开发环境:KEIK 7.06 -STC89C58 SCM done with the data acquisition and control 12 AD switch TLC2543, MODBUS communications protocols used (RTU), Switching to allocate yards from the plane to change addresses, support analog or digital literacy. (4 analog input, six-channel switching output (output relay), eight-way switch input) development environment : KEIK 7.06

自己为XF-S4240语音合成芯片所写的驱动程序，对应arm2410的开发板。通过iic总线来控制芯片。-Themselves as the XF-S4240 written by speech synthesis chip driver arm2410 corresponds to the development board. Iic bus through the chip to control.

详细讲述了如何将UCOS II移植到ARM平台上，并给出了一个移植例程的源代码-Described in detail how to UCOS II ported to ARM platform, and gives the source code of a routine transplant

usb接口的移动硬盘，采用c语言，pidusbd12芯片-usb interface of mobile hard disk drives, using c language, pidusbd12 Chip

LPC22xx代码示例，IAR EWARM代码-LPC22xx code examples, IAR EWARM code