1, arm7 chip liquid crystal 2138 driver 2, ym320240 LCD Driver 3, dynamic wait i...

msp430入门所需的资料全在里面的，是PDF版！-MSP430 entry required that all information furnished on the inside is PDF version!

这是24c02通用IC卡的驱动， 是我自己写的，并已经测试通过-24c02 this the definitive driver IC card, I wrote it myself, and has been tested through

本程序用于把串口助手所写内容通过pc发送给单片机，并且由单片机把所写内容发送到lcd上面进行显示，所用单片机为日立系列h83664十六位单片机，实验证明可以准确显示pc上面所写的内容。里面包含各个写lcd的子程-This procedure for the serial written by aides through the pc sent to the microcontroller, and written by Singlechip the above content is sent to the lcd display, single-chip microcomputer used for the Hitachi series h83664 16 microcontroller, Experiments show pc can accurately display the contents of the above written. Which contains a subset of the various write-way lcd

使用IAR编写的DS1302时钟芯片驱动和4*4矩阵按键的扫描函数，可以使用按键设置时间，采用msp430f149单片机-IAR prepared using DS1302 clock chip driver and 4* 4 matrix keypad scanning function, you can use the keys setup time, using MSP430F149 single-chip microcomputer

实现对ADE7758电能芯片的读写和校准,8051单片机,通过PC对电参量进行校准-Realize on-chip ADE7758 energy literacy and calibration, 8051, through the PC on the electrical parameter calibration

通过DS18B20读取温度（范围-55C~125C，精确到小数点后一位），通过4位数码管显示出来。 当温度为正且百位为零时，不显示，当温度为负时百位显负号。当温度百位和十位都为0时0都不显示。-Read through the DS18B20 temperature (range-55C ~ 125C, accurate to one decimal), through four digital tube display. When the temperature is zero and 100, do not show, when the temperature is significantly negative at minus 100. When the temperature is 100 and 10 are not displayed 0:00.

TFT液晶控制程序 -TFT LCD control procedures TFT LCD control procedures TFT LCD control procedures

C51 TIMER 0的使用 Timer_0_mode_0_timer_gate_soft-C51 TIMER 0 use Timer_0_mode_0_timer_gate_soft

实现对ADE7759电能芯片的读写和校准,AVR单片机源码与电路图,单相电能表读写程序和初始化程序-ADE7759 chip to realize the power to read and write and calibration, AVR Singlechip source with schematics, single-phase watt-hour meter reading and writing procedures and initialization procedures

一个用单片机控制饲服电机的程序，采用ＯＭＲＯＮ光纤感应器实现的剪纸机，已通过调试-By feeding a single-chip microcomputer to control the electrical service procedures, the use of fiber-optic sensor OMRON realize the paper-cutting machines, has passed through debugging