ds1302和ds18b20和1602液晶显示，能显示日期，时间，和温度，并且附有详细的说明...

读SPI接口数据存储器的汇编程控.可用于仿真器,电脑显示读出版界2个字节及起始地址.-SPI Interface Data Reading a compilation of program memory. Emulator can be used, the computer display read the publishing industry and two-byte starting address.

二进制文件比较程序-binary file comparison procedures

运行可执行程序testword.exe，出现菜单主界面，按回车键出现由26个字母组成 的乱序行，这时其中任一字母落下，在键盘上敲入该字母，如果输入正确，字母 消失；按ESC键返回主界面；按空格见暂停；按‘E’退出。-Run the executable program testword.exe, the main interface, the menu that appears, press the Enter key appears composed of 26 letters out of order lines, when any one of the letters fall in the Jianpanshangqiao into the letters, if you type correctly, the letter disappeared Press ESC key to return to the main interface according to space, see the moratorium Press " E" out.

AT24C02串行E2PROM的工作原理与读写-AT24C02 serial E2PROM of the working principle and to read and write

进一步实现了VC++实现计算器功能，分为普通型和科学型-Further realization of the VC++ to achieve calculator functions are divided into common type and science-based

伟福LAB2000单片机仿真系统直流电机控制:利用实验仪上的D/A变换电路，输出-8V至+8V电压，控制直流电机。改变输出电.压值，改变电机转速，用8255 的PB.0 读回脉冲计数，计算电机转速。在电压允许范围内，直流电机的转速随着电压的升高而加快，若加上的电压为负电压，则电机会反向旋转。本实验仪的D/A变换可输出-8V到+8V的电压，将电压经驱动后加在直流电机上，使其运转。通过单片机输出数据到D/A变换电路，控制电压的高低和正负，观察电机的旋转情况。 在电机转盘上安装一个小磁芯，用霍尔元件感应电机转速，用单片机控制8255读回感应脉冲，从而测算出电机的转速。 -err

51开发MP3应用程序-51 the development of MP3 applications

MCD1实战入门篇,点亮单个LED的程序。 该实战的目的作为学习和应用MCD1在线调试工具套件，进行项目的软件和硬件 联合调试的范例程序，也就是当做一个用户程序实例，而演示板暂时充当用户电 路的角色。这样就构成了一个软件、硬件齐全的自制项目模拟环境。 本程序实现的功能是，把端口RC的8条引脚全部设置为输出模式，并让RC0 送出高电平，从而点亮RC0口的一个LED。 该程序可用于PIC16F87X(A)所有系列-Actual entry MCD1 articles, a single LED lit procedures. The real purpose for learning and application debugging MCD1 online suite of tools to carry out the project software and hardware examples of joint commissioning procedures, that is, as a user instance, and the demo board temporarily to serve as the role of the user circuit. This constitutes a software, hardware, a full range of home-made simulation environment projects. Realize the function of this procedure is that the 8-port RC pin all set to output mode, and sent high RC0, so I lit RC0 a LED. The program can be used to PIC16F87X (A) of all series

有限元分析设计轴承软件，一般采用ANSYS去进行分析应力等作用-finite element analysis software design bearings, normally used to ANSYS stress analysis, etc.

常用EEPROM芯片的读写操作，51单片机控制电路，实验时要用74LS373一片，AT28C16一片，AT28C17一片，电路十分简单，根据实际电路联接情况，自行确定存储地址，最后别忘了还要8个LED和470欧姆电阻.-EEPROM chip used to read and write operations, 51 MCU control circuit, experiment, use 74LS373 1, AT28C16 1, AT28C17 1, the circuit is very simple, based on the actual situation of the circuit connectivity, self-determined memory addresses, finally do not forget to also 8 LED and 470 ohm resistors.